Windows 10: New ram dosent work

I just bought 2 new 16 gb Corsair vengance 3600 ram sticks but when I put both sticks in for dual channel ram my pc won’t boot. I’ve tested each individually and they both boot in single ram mode. I have tried resetting my cmos battery and resetting all bios settings. I also have a Mai mag Z690 tomahawk wifi and intel I7 12700k . I have no clue how to fix this so I would like some help please

:)

 

New RAM not working as expected...

aaah ok so youre running 6gb total.. and two different brands of ram... (4GB + 2GB).
try and loosen the timings a bit to see if thats causing the issue... also check whether that new rams plays is in the Qualified Vendors List with that motherboard.. perhaps thats the incompatibility.

First thing id suggest is to just start with 2gb of the new ram @1066 with your 3.2ghz overclock... see if that posts, if it does then put in the other 2gb (same brand).... see if that posts....then finally put in the old ram (to make your 6gb). but its probably a timing issue running old ram with new at its maximum rated speed.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

To RAM or not to RAM...

Hey genesis what hardware have you bought, you might be able to save on the ram and step up the rest of the hardware a little...

Or you could go out on the town as suggested... *Big Grin