Windows 10: New Router Problems

I've had to replace my router and no longer get a response when I request the free 15000 point offer. What can I do to get this offer?

:)

 

DNS problems with router

A couple suggestions I have for you:

Update the firmware on the router. Maybe it's getting into a badstate, and a firmware update might fix it. Or if you're comfortable with it, install a custom firmware like dd-wrt. Just make sure its supported on your router first.

Change your DNS to: 8.8.8.8, 4.2.2.1. Might help.

If none of these work, maybe statically set your DNS on your PS3/PC to the IPs you listed, taking the router out of the lookup procedure.

Last option, is look for a new router.

 

Need new Router

Doesn't your ISP has a list of suggested routers? If not, look for 802.11 AC Wireless routers.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".