Windows 10: Newly made Windows 10 install usb giving a blank screen if the drive is still plugged in.

Discus and support Newly made Windows 10 install usb giving a blank screen if the drive is still plugged in. in Windows 10 Ask Insider to solve the problem; Pretty much as the title says. Newly made Win10 install USB, new samsung SSD. If there if the ssd is not plugged in, the install USB works as normal,... Discussion in 'Windows 10 Ask Insider' started by /u/Reddrago9, Oct 23, 2020.

  1. Newly made Windows 10 install usb giving a blank screen if the drive is still plugged in.


    Pretty much as the title says. Newly made Win10 install USB, new samsung SSD.
    If there if the ssd is not plugged in, the install USB works as normal, loading up and asking the usual steps.
    However, if I instead start the machine with the SSD plugged in, boot to the USB, I am still greeted by the windows logo as normal, then the normal loading sequence, then the screen just goes blank.

    Any ideas?

    submitted by /u/Reddrago9
    [link] [comments]

    :)
     
    /u/Reddrago9, Oct 23, 2020
    #1
  2. Delta6326 Win User
    Delta6326, Oct 23, 2020
    #2
  3. thraxed Win User
    Installing windows off of a USB stick

    Step By Step from vista:
    From admin cmd prompt

    1. diskpart
    1a. list disk
    2. select disk 1 (replace 1 with your usb drive)
    3. clean
    4. create partition primary
    5. select partition 1 (replace 1 with your usb drive)
    6. active
    7. format fs=fat32
    8. assign
    9. exit

    Copy Windows Vista's DVD ROM content to the Flash Drive

    xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

    And that's it, boot off your usb disk
     
    thraxed, Oct 23, 2020
    #3
  4. W1zzard Win User

    Newly made Windows 10 install usb giving a blank screen if the drive is still plugged in.

    W7 Hard drive partition issue

    to get rid of that 100 meg windows partition that setup creates for you on a new install on a blank hdd:

    - press shift+f10 when on the partition management screen in setup <-- this opens a command prompt
    - diskpart <-- start the windows command line partition management tool
    - list disk <--- list the installed hdds in this computer for the next step
    - select disk 0 <- might have to replace 0 with the number of the correct disk
    - clean <-- this will erase all data on the disk you selected one step up- dont use the wrong disk!
    - create partition primary <- creates a primary partition taking up all space on the drive, adjust the command if necessary
    - exit, exit to exit diskpart and the command prompt
    - click refresh in partition manager and select your newly created partition and install to that
     
    W1zzard, Oct 23, 2020
    #4
Thema:

Newly made Windows 10 install usb giving a blank screen if the drive is still plugged in.

Loading...
  1. Newly made Windows 10 install usb giving a blank screen if the drive is still plugged in. - Similar Threads - Newly made install

  2. When trying to install windows 10 with USB on UEFI Mode it gives a blank blue screen

    in Windows 10 Software and Apps
    When trying to install windows 10 with USB on UEFI Mode it gives a blank blue screen: when i try to install windows 10 from USB on UEFI mode it shows the windows logo no progress circle and then the whole screen turns light blue CSM support is disabledSecure boot is disabledFast Boot is Disabledthe USB drive is not faulty since i tried it on my a different PC...
  3. When trying to install windows 10 with USB on UEFI Mode it gives a blank blue screen

    in Windows 10 Gaming
    When trying to install windows 10 with USB on UEFI Mode it gives a blank blue screen: when i try to install windows 10 from USB on UEFI mode it shows the windows logo no progress circle and then the whole screen turns light blue CSM support is disabledSecure boot is disabledFast Boot is Disabledthe USB drive is not faulty since i tried it on my a different PC...
  4. When trying to install windows 10 with USB on UEFI Mode it gives a blank blue screen

    in Windows 10 Installation and Upgrade
    When trying to install windows 10 with USB on UEFI Mode it gives a blank blue screen: when i try to install windows 10 from USB on UEFI mode it shows the windows logo no progress circle and then the whole screen turns light blue CSM support is disabledSecure boot is disabledFast Boot is Disabledthe USB drive is not faulty since i tried it on my a different PC...
  5. USB installer boots to blank screen with Windows logo.

    in Windows 10 Installation and Upgrade
    USB installer boots to blank screen with Windows logo.: I've just built a new computer, and I'm trying to install windows 10 on it.I've created a USB windows installer from laptop,I can successfully boot to the USB drive but it does not start windows setup, only shows a blank, black screen, with a windows logo.Below are the system...
  6. Newly built PC will not boot Windows USB Drive for installation

    in Windows 10 Installation and Upgrade
    Newly built PC will not boot Windows USB Drive for installation: I am having a issue with the new pc I just built.Specs:CPU: AMD Ryzen 9 5900XRAM: 2 x Corsair Vengence 8GB 3200MHzMOBO: ASRock X570 TaichiGPU: Gigabyte RTX 2070 Gaming OCCPU Cooler: Corsair H150i Elite CapellexPSU: Corsair RM 750xSSD: Samsung 970 EvoHDD: 2 x Seagate Barracuda...
  7. Windows 10 won't install from newly created USB recovery drive

    in Windows 10 Updates and Activation
    Windows 10 won't install from newly created USB recovery drive: Hello there. I chose to give my PC a complete reset, erasing everything on both my SSDs. But first I created a recovery drive with an USB stick. Problem is, after it has completely erased everything it won't install from the USB stick. This is what happens: 1. Put in USB...
  8. Windows Security gives a blank screen

    in Windows 10 Ask Insider
    Windows Security gives a blank screen: Hello, I have Windows 10 Home ver 1909 build: 18363.657 when I go Window Security and click on Open Window Security it opens a blank window. Also Virus and Threat protection has green check marks however clicking the Quick Scan does nothing. Real time protection is grayed...
  9. Windows 10 gives blank screen after installation on SSD

    in Windows 10 Support
    Windows 10 gives blank screen after installation on SSD: Hey guys I just installed Windows 10 on an SSD using a DVD. After the installation finishes, I get nothing but a black screen. I popped into BIOS to put the SSD first in the boot order, but even though it's first I have no changes. So to clarify, BIOS loads fine, but after...
  10. USB Plug in Drives

    in Windows 10 Drivers and Hardware
    USB Plug in Drives: I am having problems in getting an External DVD Drive recognised by my laptop that is running Windows 10 with 1803. When the laptop is operating and I plug in a Canon Camera SX730-HS the File Explorer immediately recognises the camera yet when I plug in the external DVD...