Windows 10: Nextbook camera problem

I have a stick computer coming which should be delivered Monday. I need to do the same process on it when it comes so will take some screenshots as I do the process.

 

Ok keep me updated, thanks

 

Hello NavyLCDR, I'm trying it out myself with some online tutorials, all I need to know is should I image disk or clone disk? Also, can I use flash drive for macrium reflect or I need sd card?

 

Image and flash drive.

 

Thanks, going to bed now, will try it out tmr and post results

 

Hello Navy, i backuped the image successfully on my Windows 8.1 pc and when i try to restore to Windows 10 pc:
I click on select a disk to restore to, select windows C:
Then press next, it shows restore summary, and click on finish:

Then i get error 'Automatically boot into windows PE. This option is only available if you have enabled the windows boot menu option in Macrium Reflect"
"Unable to lock drive, Following drive is in use and the restore cannot continue. Select 'run from windows PE' to automatically run this restore the next time windows PE starts"
Then i click on "Run from windows PE" It then says "Please reboot your PC with the windows PE rescue media or recovery boot menu". I Then boot the pc and it goes to Windows 10. have rescue file on my desktop...

Please help

 

Hello NavyLCDR, i finally restored my windows 10 tablet to windows 8.1. Now when i open the camera it says "To get started, connect a camera". I went to device manager and saw:
2 Unknown device with yellow tag
1 Security devices with yellow tag

Under imaging devices i see "Intel (r) Imaging Signal Processor 2400". When i right click and choose properties i see "This device is working properly"

I have exported drivers from another tablet same model with camera working and have the drivers. Can you help me out?
Thanks

 

Right click on each unknown device, select update driver software, browse my computer for driver software, browse to the folder that you exported the Windows 8 drivers 2, make sure the Include subfolders box is checked and click next.

 

Hello NavyLCDR, i compared my 2 tablets and i realized the unknown device is actually "Camera Sensor HM2056". I tried installing the driver for this which i extracted from the working tablet but getting: Camera Sensor HM2056 with a yellow triangle. When i checked properties it says 'Device not working properly because windows cannot load the drivers required for this device'. I now know what the problem is, a few days ago when i got hold of this tablet i upgraded the BIOS of this tablet to BIOS image version EB1015.2.02.018 from version EB1015.1.02.005. Is there any way to downgrade the BIOS version?

 

If not possible to downgrade can i clone the BIOS version and not settings from one pc to the other pc so that it replicates the BIOS version in the target pc from the 1st pc?

 

The only way to downgrade the bios would be to download the bios file provided by the manufacturer and use their flash utility to flash it.

 

I doubt I can get the BIOS file from the manufacturer