Windows 10: no audio passing thru

i plug an instrument into the line in jack on my sound card, i select line in as my recording source. i can see a level but i cant hear it. i hear all other audio on the system. i can even record it without hearing it then play back the recording and hear it but there is no audio going through. just upgraded to windows 10 never an issue in 7, using the same method on the same system for decade.

:)

 

WinTV-1800 Pass through Audio?

let me look up that model of the card and see what i can find out.

edit: their site really sux... no real information about the hardware. If I found the right one, your's has two RCA connectors near the bottom of the card. I'm guessing this is the Line-In feature for this card.

this is the best I can think of... (assuming windows 7 properly detects the hardware's line in)

Step One: Plug in the audio from the PS3 to the RCA on the tuner
Step Two: Right click the speaker icon near the clock on the start menu and select "Recording Devices"
Step Three: Look for anything listed that relates to your TV tuner's Line-In, make sure it is enabled. When it says its "Ready" right click on it and select "Properties"
Step Four: Click the "Listen" tab
Step Five: place a check in "Listen to this device" and in the dropdown menu under that select your speakers for the playback.
Step six: Play a game and test the audio... If its working Enjoy!
Optional step... go back to step three, when the properties box comes up click the "Levels" tab. Here you can adjust the input volume of the device

Hope this helps, and that it lets you do so

edit: should you decide to get an adapter for the rca, these steps are pretty much the same for the line in on your sound card.

 

Can not record audio.

Hi,

We suggest that you run troubleshooting for Audio Recording by following these steps:

• Type troubleshooting on the search box.
• Click View all.
• Select Recording Audio.
• Follow the steps to troubleshoot Recording Audio.

Let us know if you need further help.

 

Unable to access HP Simple Pass to Sign-in to the computer on Windows 10

Hi Jerome,

Thank you for posting in Microsoft Community and being a part of Windows 10.

I understand your concern about accessing HP simple pass after upgrading to Windows 10. We will help you with this issue.

• Do let us know the make and model of your computer?
• Have you installed HP simple pass software on your computer?

Try the below steps and check if it helps.

Step 1: I suggest you to download the latest HP Simple Pass software from the manufacturer's website install it and check if it helps.

Step 2: If you have already installed the software, I suggest you to re-install it and check if the issue persists.

Follow the steps to Access Recovery Manager:

• Press Start button from the keyboard, type Recover Manager.
• Select Recovery Manager from the list when it becomes available. Allow the action to continue, if prompted. The
  HP Recovery Manager opens.
• Click Software program re-installation, Next , select
  HP SimplePass for the listing and then follow the on-screen instructions to reinstall application
  

Hope it helps. Try the above and get back to us with an updated status of this issue for further assistance.