Windows 10: No audio playback of my microphone despite propper settings.

Hello folks,

long story short: I want to listen to myself when I speak in to my microphone but can only do so with latency. I followed tutorials that claimed to have found a fix:


right click sounds - playback - right click on my headphones - levels - unmute microphone.


According to the tutorials I should now be able to hear myself latency free. But I can not hear myself at all, despite how high I turn the slider.


I am using a blue snowball USB mic and Bose QC25. Any help would be really appreciated as this is driving me INSANE!

:)

 

Having to unplug microphone to hear playback.

Hi Mark,

There are several audio inputs on your PC depending on your motherboard. It is possible that you are plugging your
microphone in the jack which supports audio in and audio out (same as phone jacks) and is set as your playback device. When this happens, you will not hear the audio out because the audio signal is sent into the microphone. Simply unplug your
microphone and move it to the microphone jack and you will be able to hear the playback sound.





If you are sure that your microphone is connected to the microphone jack, it is possible that your playback device is being disabled by your microphone. To enable/change your playback device, kindly follow these steps:

• Right-click the Volume icon on the lower-left corner of your screen.
• Click Playback devices, right-click your speaker (or any preferred playback device), and click Enable.
  
  Note: If you cannot see your preferred playback device, right-click on your current playback device and click
  Show Disabled Devices.

Let us know how things go.

Regards.

 

Audio recording settings / microphone settings on skype not working

Hi Bill,

Thank you for writing to Microsoft Community Forums.

There is an option ‘Automatically adjust microphone settings’ in Skype. Try adjusting Skype sound in the application by following the below steps:



a. Open Skype.

b. Navigate to Tools > Options > Audio Settings > Microphone.

c. Select the default device.

d. Uncheck the ‘Automatically adjust microphone settings’.

Also, I suggest you to adjust Skype sound in the control panel to fix the recording issues. You can do this by following the below steps:

a. Open ‘Control panel’.

b. Select ‘Sounds and Audio Devices’.

c. Click on ‘Playback’ tab.

d. Verify that nothing is set to mute.

e. Verify that microphone is checked under the ‘Recording’ tab.

Try updating Skype, if any update is available. Please follow the above steps and get back if the issue persists.

Hope it helps.

Naveen M

Microsoft Community – Moderator

 

Sennheiser GSP 350. Microphone stops working when I open any game

Wow, ok. I think I've fixed it by accident while fiddling around.

It appears to be the Realtek audio being the issue here. I don't use my onboard sound card as my headset is a USB headset only and my speakers are plugged into an ASUS sound card.

Step by step fix:

• I went into recording devices
• I enabled STEREO MIX (Realtek High Definition Audio)
• Then I set that Stereo Mix as the DEFAULT DEVICE (At this point it took over both input and output devices without my permission )
• Then set my Sennheiser headset as default recording and playback devices in their respective windows even though they both still said they were the default devices when they weren't

Headset microphone is currently functioning while in game now. I'll update the thread if it goes again. Should I completely disable Realtek audio??? Or will windows just force it to work again?