Windows 10: "No Battery is Detected" message

"No Battery Is Detected" appears at the bottom right side in the task bar. Desktop runs on Windows 10. Checked Device Manager, under Battery, only the external battery APC-UPS un-interrupted power supply is listed and shows "Device is Working Properly". When I tried to update the driver suggested by Microsoft Help website, got "Driver has the most up-to-date driver, and don't need to update". I did not try another suggestion on the Help site, which is to uninstall this battery and re-install, because I'm afraid that if I uninstall it, it disappear from the Batteries list in Device Manager

:)

 

Battery not detected (Unknown remaining)

Hi,

First of all I suggest you to try with a driver remove and reinstall with Device Manager. To do so:

1. Press WINDOWS + X

2. Click on "Device Manager"

3. Click on "Battery"

4. Right click on the first element on list

5. Click on "Remove"

6. Repeat steps 4 and 5 for the second element on list

7. Click on "Detects Hardware change" (monitor icon)

Then reboot your system and check if the problem still exists.

Please tell me if the solution works.

 

No Battery Is Detected error on ASUS Laptop

My Asus battery says no battery is detected even after I followed these same steps. I have tried a lot of different ways but it still shows the same thing. What do I do?

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.