Windows 10: No bootable device found after systems board and CPU/memory upgrade

After finding that the CPU fan had failed was the reason for several problems with my Windows 10 desktop I replaced the system board Gigabyte GA-Z87-D3HP and CPU i7-4770, together with new DDR4 ram, and for good measure, a new power supply. I retained the original CD/DVD drives, SSD and 3 HDD but removed an ageing GPU card GeForce GTX-650 as I considered the onboard graphics in the new hardware would be more than adequate for my needs . The new motherboard is a GIGABYTE Z690 UD DDR4 and the CPU an i7 12700K. The original system was password protected which may have some influence on

:)

 

'System and compressed memory' on ASUS G75VY notebook load CPU always on 16%

thank you for your reply!

here what I did:

1. disabled non-microsoft services, disabled all applications in startup list

result: after restart "system and compressed memory" still gain 17% CPU

2. ran PC into safe mode ( just to see what happens )

result: CPU load is 0% for "system and compressed memory"

3. ran PC in normal mode

result: CPU load is 0% for "system and compressed memory"

as we can see from step 1, the problem probably is not in applications ?

what would you suggest in this case ?

looking forward for your answer

 

System Reserved Memory issue

Hi Rowan,

The reduction in available system memory depends on the configuration of the following:

• The devices that are installed in the computer and the memory that is reserved by those devices
• The ability of the motherboard to handle memory
• The system BIOS version and settings
• The version of Windows 10 that is installed
• Other system settings

As an initial troubleshooting step, I suggest that you check your system for memory problems.

Here's how:

• Type mdsched.exe in the search bar and select the best match.
• When prompted by the User Account Control, enter an admin user name and password, and click
  Yes.
• Follow the on-screen instructions to run it.

Let us know how it goes.

 

Multi-bootable USB

Hey guys from TPU, couldn't find any specific thread pertaining to the question asked on title. As mentioned, I'm trying to create a bootable USB, but with many specifics boots available.

I've been trying to create one with multiple boot device including one that enables me to run Windows 10 directly on the USB Thumb Drive but to no avail.

The list of bootable images i'm trying to create are

1. Windows 10 (A full OS running from thumb drive)
2. Windows 10 ISO (Bootable disk image for fresh install)
3. MemTest86+

Have tried YUMI or UUI from the website USB PenDrive Linux but as this is my first time, i don't know how am i screwing up or am doing it right.. Anyone got a rough idea on a step by step guide? Thanks!