Windows 10: No HMDI signal from my device.

Please help. suddenly yesterday I plugged in my external monitor and got a message on screen that no HMDI signal. I looked into the problem and did everything suggested. Its not my HMDI cable at fault as another external monitor I use TV gave the same response. I went in and updated the drivers for both display adapters in my laptop, both the Intel UHD graphics and my Nvidia RTX 3050 card have the latest drivers. I then went and uninstalled both display adapters and rebooted my laptop and allowed for reinstallation to occur and still no signal to HMDI output. I tried a rollback on drivers a

:)

 

xbox 360 splitting video signal

Hello,

I just happened to come over your post.

Could you please tell us exactly where you don't get any signal? Both the screen and the computer (via capture device)?

Have you tried the following?

• Make sure you get a signal to the screen when using an HDMI cable directly from the Xbox 360 to the screen. Please make sure all cables work.
• Make sure you get a signal to the capture card with the same cables.

If you get a signal on the screen but not on the computer, could you please try the following?

• Set the Xbox 360 to output at 720p. The frame rate will (or should) be 59.94.
• If possible, make sure you capture the video with the same settings on the computer.
• Try any other settings if this does not work.

If it still does not work, please try this in the same order:

• Power off computer (and capture device) and Xbox 360.
• Power on computer (and capture device) and wait until the capture device is properly powered on and initialized.
• Power on the Xbox 360.
• Make sure you can capture properly.

If it still does not work, make sure that one or more of the following are not defective:

• The HDMI-VGA/composite adapter.
• The VGA cable.
• The capture device (could be just the input connector).

If that works, please install the HDMI splitter.

I am wondering a bit why you show us the wires inside the HDMI cable. Did you remove the isolation and/or do something with the wires?

I am not sure what else to suggest at the moment.

Could you please tell me/us the model of your capture device, and also the adapter between the HDMI cable and capture device?

Regards,
awd_

 

wi-fi signal is weak

Hey Jonian,

This issue could have occurred due to these reasons:

• Incorrect network settings.
• Network adapter is not working properly.

I suggest you to try the steps listed here and check if it fixes the issue or else contact your ISP for weak signal.



Method 1: I suggest you to refer the article and check if it helps to fix network connection issue.

Windows help and learning



Method 2: If the issue persists, I suggest you to refer the steps in the article which will help to fix common issues with network connection. Check if it helps.

Fix Wi-Fi connection issues in Windows - Microsoft Support



Hope this information helps.

 

HMDI interrrupts (web) audio

What you can do is you can switch the audio output to your laptop whenever you attach the second display. To do this, follow these steps:

• Connect your computer to the second display.
• On the lower right corner of the screen, right click the speaker icon.
• Choose Open volume mixer.
• Under Device, click the name of the device. The name of the device is under the icon picture.
• Choose the speaker of your laptop.
• Check if the sound will come out to the laptop's speaker.

Let us know how it goes after you perform the steps above.