Windows 10: No internet access using ethernet

Good afternoon everyone, I was just browsing the Internet, then i was about to watch a video and it wouldn't load . So i restarted my pc and once everything loaded the ethernet icon said no internet so i looked into this further and in the network status page it said no internet access . I am using powerline adapters as i am not close to the router, also i updated the ethernet drivers because they were really outdated i believe they were 2019 drivers or something. So im kinda lost on what the issue could be.

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

"No Internet Access" on Ethernet and Wireless - Windows 10

Steps taken to resolve:

• Downloaded from Realtek and installed Windows 10 driver for Realtek PCIe FE Family device
• reset winsock and ip4 and ip6.
• reset DNS cache
• forced media connection by changing ip4 to fixed ip address, gateway, and dns server. Able to ping other devices on network - including gateway, but could not connect to internet. Diagnose unable to find issue with connection.
  • "ipconfig /release" message is "no operation can be performed on (adapter name) while it has its media disconnected."
• when using DHCP, do not receive response from default gateway, so ipconfig has strange addresses. Diagnose returns:
  • "Ethernet" doesn't have a valid IP configuration.
• all other computers on network able to use DHCP for addresses.

trudging through topics on tech forum(s) to find other solutions. Need suggestions on resolution.

 

Internet Slowdown on my Desktop - Ethernet Connection

Thanks Vijay. I went through your steps other than the repair upgrade, and there was no change. Before I do the repair upgrade, I want to check on another angle.

I went into Networks and Sharing and realized that Windows is simply not recognizing my Verizon modem/router as the Ethernet connection. The slow internet access is due to the fact that the desktop is picking up the WiFi signal, and it's not strong on this
device.

For Ethernet, I get an "Unidentified Network" and when I click on Ethernet Status, the IPv4 and IPv6 connectivity lists "no network access". Looking at the Ethernet properties, the "Connect Using" lists Realtek PCle GBE Family Controller. Shouldn't it
be the Verizon modem name? Also noticed that the Microsoft Network Adaptor Multiplexor Protocol is unchecked. Not sure if that matters.

I think what I need to do is somehow configure the Verizon modem again, but not sure how.