Windows 10: No internet, can't connect to network etc.

For past 3 weeks I've had a problem with network on windows 10 64 bit (1809 17763.379) Dell XPS 15. It applies only to the first wifi network I connected to, the second one seems fine.


Issue #1

Everytime system boots it either cannot to the network or when it connects there is no internet.

If I try to reconnect it takes around 2 minutes until I get message cannot connect to the network.

If I connect to the second network, everything works. I don't use the second network because it is on the floor below my room.


I've went through all the troubleshooting steps I can google, but the issue persits.

Sometimes I need to reboot the system, sometimes I need to reinstall the adapter driver but everytime the system boots I can't connect to the network.

I've been checking the wlan report and it gave me no useful informations.


Issue #2

When finally I connect to the first network, after 30 to 60 minutes of use I lose internet and again can't connect to that network.


Issue started to occur since last? one before? windows update.

:)

 

Connecting computer with no internet connection to network printer


@dk1971

1. Open Admin command and type: ipconfig
   
   
   
2. Win+X->Control Panel->Netwok and Sharing Center
   Follow the screen shot. This should disable internet access from this PC but allows access to local device(s)
   NOTE: Use the IP & Subnet Mask from step 1. Leave Default gateway & DNS Server blank
   
   
   

 

Set Broadband Internet Connection Network Configuration

Hi,

Upon analyzing the details you have provided, kindly run the
Network and Internet Troubleshooter
and check if there's any changes. To run the
troubleshooter,
follow these steps:

• 
  On the search bar, type
  Troubleshooting.
  
• 
  Choose
  Network and Internet.
  
• 
  Run the following
  Troubleshooter:
  
  • 
    Internet Connections.
    
  • 
    Network Adapter.
    
  • 
    Incoming Connections.
    

If the issue persists, we suggest that you try to
renew
your
IP address. To do this, follow these steps:

• 
  Open
  Command Prompt
  as
  Administrator.
  
• 
  Type the following command:
  
  • 
    Ipconfig/release
    and hit
    Enter.
    
  • 
    Ipconfig/renew
    and hit
    Enter.
    
  • 
    Exit.
    

Let us know how it goes.

Regards.

 

Losing network connection

Hello Dear, if you have a laptop or a PC with a wireless network adapter, you can see a list of available wireless networks and then connect to one of those networks. The wireless networks will only appear if your PC has a wireless network adapter installed, the adapter is turned on, and the wireless access point is in range.

1. Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.

2. In the left pane, under Network Tasks, click View available wireless networks.
In case, If you don't see the network you want to connect to, click Refresh network list. If you see the network but the signal is weak, move the PC closer to the wireless router.

3. Click the network you want to connect to, and then click Connect.

4. If you're connecting to a secure network, type the security key, and then click OK.

I Hope you solve out your query soon.