Windows 10: No matter what I do I can't get to windows recovery or fix

I have tried the 3 times reboot, usb, hotkeys, the closest I got to anything was the USB method. I got to the install or repair thing, I clicked repair, and it just goes to a purple screen. I've got the unmountable volume sound error, I can't boot to the desktop, it just shows the blue screen and goes into restarting infinite times. I have looked into every single YouTube video and I don't have a clue what's going on.

:)

 

Data recovery software

The Big Useful List Of Free Useful Programs To Use Usually For Free

click the top spoiler and then look down to recovery.

All of the suggestions in the old threads were consolidated into that one.

 

How does Windows boot to advanced recovery option e.g. command prompt?

- that gives me a 454 'Unexpected error' This tells me that the BCD is partially corrupted.

The commands: shutdown.exe /r /o /f /t 00
or: %SystemRoot%\System32\Cmd.exe /c reagentc /boottore&shutdown /r /f /t 00
should boot into Recovery if everything is configured correctly.
FYI, If Windows is configured correctly:

1. If Reagentc is disabled, you still can get into Recovery but with limited options.
2. If Reagentc is enabled, you'll get all options.
3. If you boot Windows using Recovery USB stick, You'll get into Recovery with couple of options missing.

Here's my suggestion if you want to try:
OPTION 1: Will save the trouble of re-install Windows.

1. Download the image of my first 3 partitions (450MB Recovery, 100 MB EFI partition, and 16MB unformatted primary)
   EFI_Boot-00-00.7z - Google Drive
2. Run Macrium and restore the image from step 1, overwriting your existing 1st three partitions, leaving C alone.
3. Delete the 490MB Recovery partition.
4. From Macrium, run fix boot problems.
5. Reboot. Open Admin command prompt then run Reagentc /info to make sure that it is enabled. If not, enable it.
   if failed to enable, reboot and try again.

OPTION 2: Assuming you've already had Windows backup with Macrium.

1. Wipe out the first 5 parttiions. (450MB, 100MB, 16MB, C Drive, 480MB)
2. Fresh install Windows 10
3. Restore C drive from backup image, run fix boot problems
4. repeat step 5 from OPTION 1 above.

 

2 x SSD Raid 0 - is this right?

T ski b4 your done with this post can you list a step by step fix of what you did, I would appreciate it if you would...Thanks