Windows 10: No mic input after the latest windows 10 update, it says no jack information available

I've checked the privacy settings and I've restarted my computer. The output sound works and it's connected to my pc through the same usb.

submitted by /u/OkRasmus
[link] [comments]

:)

 

Microphone "No Jack Information Available" after latest update

Hey kittrz,

That should say "No Jack Information Available" if your microphone is USB-based.

Since this happened in the latest update, and that you were able to listen to your own mic, you should try the following:

Hit Windows key + I, go into Privacy. On the left pane, click Microphone.

Be sure that Allow apps to access your microphone is on, and the apps in the list under Choose which apps can access your microphone are checked on.

Let me know how this goes, and good luck.

 

Microphone "No Jack Information Available" after latest update

Hey, once my PC updated, nothing was picking up my mic, and it would just say "No Jack Information Available".



When I try to go to the listen tab, however, I can still hear myself fine. No other applications will detect any audio from my mic.

 

Rear mic jack and line in jack not working - windows 10 detects when mic is plugged in but no sound recorded. Mic works fine in front jack

Please help! My mic does not work when plugged into the rear mic jack or line in jack. The speakers plugged into the rear jack work fine - on the same group of ports as both the rear mic jack and line in jack.

The same mic works fine when plugged into the front mic jack.

Windows detects when the mic is plugged into either rear mic jack or line-in jack. When it is the only mic is is labelled as the default device.

BUT the mic can't pick up sound. When I test it it reports max detection 0db. The levels are set to 100% and max mic boost.

I have run the troubleshooter and it can't detect any problem.

I've searched through previous questions which are similar but don't seem to give the answers... and many seem to talk about realtek sound devices but these don't seem to be realtek, it says they are microsoft devices.

for all three of these input jacks

I have checked drivers and it says latest drivers are already installed.

the device IS enabled.

I have set the privacy setting ON so apps CAN to use the microphone

all three input jacks are on the controller - 3 - high definition audio device manufacture is microsoft; Location 0 (Internal High Definition Audio Bus)

the properties information says they are working properly - for all 3 jacks.

What I want to be able to do is use both the front mic AND one of the rear mic inputs at the same time

but at the moment, neither of the rear jacks work even when nothing is plugged into the front one.

How do I enable the rear jacks to work and detect sound?

Do I need to do anything to make the rear jacks detect sound independently from the front jack at the same time?

hoping someone can help and thank you.