Windows 10: No sound from USB turntable

Hello,
SInce i did a re-install of Win 10 pro 2004 build 19041.508 i have no sound from the USB turntable. I previously recorded well over 400 lp's with no problems. The turntable is Ion and i used the EZ vinyl/tape recorder software. Lately after checking the recordings i noticed that one has the titles that i typed but the files are 0kb, so i need to redo it. The pc is a Dell laptop and i have two drivers on the pc. One is from April and the other one from August. Tried both with no luck. I also tried the generic high definition audio driver with the same result. Tried also the audio troubleshooter and it didn't find problems. I've been trying for hours to fix the problem. If i start EZ vinyl with no cable plugged in it tells me that no audio device is connected so i don't think the problem is with the software. What am i doing wrong? Thank you.

:)

 

Sony ps-la 300 usb turntable

Hi tgordonf,

Having a faulty USB cable or an outdated device driver are a few reasons why your Sony USB Turntable is not recognized on your laptop. For us to isolate this problem, I would like to ask the following:

• Is this the first time you're trying to install the Sony USB Turntable on your computer?
• Have you installed its driver?

While waiting for your response, please ensure that the device driver is properly installed. You may follow these steps:

1. Insert its installation disc on your DVD drive.
2. If the setup won't run automatically, then right-click your Windows key, and select
   Run.
3. Type in D:\setup.exe and click OK.
4. Follow the on-screen instructions.

To connect your turntable to your computer, please check the following:

• Make sure to use the USB cable that came with it.
• If the cable is not working, use another USB cable.
• Make sure the cable is securely connected to your turntable and the other end to the computer.
• Restart your computer while the turntable is connected.

Please update this thread with the result so I can further assist you.

Regards.

 

Need help connecting USB turntable

I have a windows 10 pro laptop that using the sound control panel will play music from the usb turntable.

I have a windows 10 home box that WILL NOT play sound from the very same USB turntable.

Neither computer supports application access to record the device

Audacity gives a -9999 error code

Sony's Audio studio app v9 will not connect to the device. No messages it shows no sound activity in the monitor

Sony suggests I may be missing a codec.

Following another MS link using device manager I updated all sound, video and game controller devices (realtek on the pro updated nothing on the windows home box updated) I then uninstalled the devices deleting the driver where appropriate rebooted and
they all re-installed.

both machines have entries for intel display audio, NVidea audio (not exactly the same) (two GPUs in each of these laptops) and a RealTek audio driver (the default for the mic and internal speakers) and due to the turntable a USB AUDIO codec (one for line
- no speaker reference here)

In addition USB Controllers shows an additional USB Composite device (expected)

AND audio input and output get two additional entries

a Line (2-USB AUDIO CODEC) the input to record from

a Speakers (2-USB AUDIO CODEC) (not high on my interest list now)

Devices and Printers has a new entry for the Speakers (2-USB AUDIO CODEC)

Lastly OpenSUSE and Audacity record from this device and the output MP3's that I have test played in windows and sound good. So the hardware appears to be functional. Note also the windows pro box successfully functions as amp and speakers for the USB turn
table too.

Can anyone suggest next steps to get this device working in windows on the Windows 10 Home Box I would like to connect it to most of the time?

 

usb turntable use

I followed all direction to enable sound of turntable connected via USB via Audacity. inally able to see output and input levels flashing but unable to hear the sound.