Windows 10: No USB input in Windows

Hi.I have a very difficult to solve and diagnose problem. When I start up normally, I reach the windows login and USB devices work, no mouse, no keyboard. The rest of the system seems to work fine as far as I can tell. The interesting thing is, that the mouse is actually powered until the login screen, but as soon as the login screen is hit it seems to be no longer powered. The same applies to the integrated notebook keyboard, external keyboards etc. To make matters worse, starting in safe-mode does the same.I am quite sure it is not a hardware issue, because all USB devices work fine on anot

:)

 

Windows 10 upgrade problem, no input accepted

i've seen this when the stock USB drivers went kaput. Only ever seen it once - i used a PCI USB 2.0 card and connected the mouse and keyboard to that, and manually updated the USB 2/USB 3 drivers.

 

Windows 10 upgrade problem, no input accepted

I really hate having to come here and ask for help, but I really am stumped. It hurts my geek pride. I have a PC with fairly modern hardware in it. It has a p8p67 pro in it. I have tried upgrading windows 10 on it twice now. Both times I have had the same result.

After windows finishes upgrading it goes to the log in/set up screen. I can't do anything. No keyboard or mouse input is accepted.

I will list some, or hopefully all, of the troubleshooting steps I have tried:

• Move keyboard and mouse to different USB ports.
• Try different keyboard or mouse.
• Restart computer, repeatedly.
• Google for related issues.
• Update Bios, because why not.
• Create boot media and revert to windows 7.

The windows 10 system restore boot media works fine with keyboard and mouse. All USB ports work in windows 7. I don't know what is wrong. I suspect that windows 10 is lacking a driver of some sort, but since the computer accepts no input I have no way of checking for which driver let alone installing it.

Please help me figure this out. If I have to revert back to windows 7 again, I am not going to get it upgraded to windows 10. Thank you in advanced.

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk