Windows 10: ntoskrnl.exe keeps causing Blue screen crashes

Hi I got a new pc lately and at first everything was fine for a couple of days then I started experiencing numerous BSODs with various reasonings1.KMODE_EXCEPTION_NOT_HANDLED Happened twice before then moving onto the others2.SYSTEM_THREAD_EXCEPTION_NOT_HANDLED3.SYSTEM_SERVICE_EXCEPTION4.IRQL_NOT_LESS_OR_EQUALI've attempted to reinstall windows through a USB which does not work as it gives a 0x8007025D error every time, I have attempted , I have done sfc which finds nothing nor does dskchk which says it also found no problems. DISM likewise does not seem to helpAt first I thought it may have

:)

 

my system keeps on crashing. (blue screen)

Hello Harrison,

A stop error (also called a "blue screen" error) can occur if a problem causes your PC to shut down or restart unexpectedly. These errors can be caused by both hardware and software issues.

To better assist you with your concern, I'd like to know the following:

• Confirm which build is currently installed on your device. To check, follow the steps below:

• Press Windows key + R, then type in winver.
• Click OK.

• Were there any recent changes made prior to this issue?
• What is the make and model of your device?

Meanwhile, we recommend performing the suggested steps in this article to troubleshoot blue screen issues
on Windows 10.

Looking forward to your response.

Regards.

 

Crash/blue screen

Hi

I assume from the title of your post Crash/Blue Screen that the PC has crashed and produced a *BSOD=[Blue Screen Of Death] =Blue Screen; and that the PC recovered from this; if and when you see the Blue Screen write the Stop Code down; recover the PC or use one that is working to access the net and look up the Stop Code.

nb: You may be able to view this with a [*BlueScreenView] application, google for this.

Edit Link - Blue screen of death (STOP error) information in dump files.

Description
===========

BlueScreenView scans all your minidump files created during 'blue screen
of death' crashes, and displays the information about all crashes in one
table. For each crash, BlueScreenView displays the minidump filename, the
date/time of the crash, the basic crash information displayed in the blue
screen (Bug Check Code and 4 parameters), and the details of the driver
or module that possibly caused the crash (filename, product name, file
description, and file version).
For each crash displayed in the upper pane, you can view the details of
the device drivers loaded during the crash in the lower pane.
BlueScreenView also mark the drivers that their addresses found in the
crash stack, so you can easily locate the suspected drivers that possibly
caused the crash.

atb

Law-II

 

Windows 10 blue screens after waking from sleep.

Steps to that cause this problem:

• Allowing windows to sleep.
• Waking once, logging in.
• Allowing it to sleep once more.
• Wait for some time like 2 hours.
• Try to login again.

After all these steps my laptop Dell Vostro 3546, stops responding on the login screen, no inputs will be taken and then Blue screens by saying Critical_Store_Exception. I have collected some crash dumps and posted it here: CrashDumps.

Blue Screen View says that the BSOD happened because of something went wrong with the ntoskrnl.exe, address ntoskrnl+142760, file version of ntoskrnl.exe is "10.0.10586.306 (th2_release_sec.160422-1850)".