Windows 10: Nvme m.2 ssd is not detected during window installation

i have HP Pavilion gaming ec0100ax laptop with amd ryzen 5 3550h processor.during window installation , my ssd is not showing .

:)

 

cloning sata ssd to m.2 nvme

Hi so i'm planning on building a new pc and my main storage drive on it will be an m.2 nvme and i want to clone my current pc's main sata ssd with my windows install on it to the new pc, I already know how to clone sata ssd to m.2 nvme and keep all my old files and keep windows but i'm wondering if there will be any hardware problems since my new pc will have a completely different motherboard, cpu and gpu, if there is any hardware problems is there anyway to get around it? or would i just have to install windows by itself on the new m.2 nvme and then afterward copy all the files except windows from the old ssd

 

What is the Maximum capacity for M.2 NVMe ssd I can use

Aspire E5-576 Laptop
MS Windows 10 Home 64-Bit (Japanese)

In my laptop there is an option to install M.2 NVMe ssd.

In the market there are M.2 NVMe ssd with various capacity (GB/TB). How do I know what is the maximum capacity for my laptop. My present Hard drive (not SSD) is showing empty space of 324 GB.

Any advice/suggestions/help in this regard will be much appreciated.

Thank you.

 

NVME M.2 SSD detected in BIOS - not detected in Windows 10 x64

Hi,

I purchased an PNY CS3030 2TB M.2 NVME SSD disk which I installed in my system. My BIOS can see it just fine under my NVME Configuration menu options, and also the BIOS function to do a controller test for this disk passes without a problem.

However, in Windows 10 x64 (up to date) I am unable to see the disk in Device Manager, or Computer Management / Disk Management section - meaning I can't initialize and format the drive.

This is a second NVME disk in this system. My first one which is also the boot/system disk is a Samsung Evo 970 Plus (also seen in the BIOS, right next to the PNY) and functions properly in Windows.

System specs:

AMD Ryzen 3900X

Asus X570 Pro - BIOS version 1405 (latest available as of this time)

32 GB DDR4 3600MHz Patriot Viper 4 (4x8GB)

Disks:

- Samsung Evo 970 Plus 500 GB M.2 NVME

- PNY CS3030 2TB M.2 NVME

- 2x WD Blue 10EZEX SATA 7200RPM 1TB drives configured in RAID0

- 1x WD Blue 320GB SATA 7200RPM

GPU: Sapphire RadeOn RX560

Power: Corsair RM1000x

OS: Windows 10 x64 Home

As said, all other disks work fine. Initially I was thinking this to be a driver issue of some sort, since the BIOS can see the PNY just fine but Windows can not. I also made sure I installed the latest available chipset and SATA drivers (I know its NVME,
but still.. ) from my motherboard manufacturer: ASUS, at PRIME X570-PRO｜Motherboards｜ASUS Global

I do not think the PNY is deffective, otherwise my BIOS would not detect it, and it would also not pass the BIOS' NVME controller tests.

Ideas?