Windows 10: OBD2 auELM 327 V1.5 setuptomobile scanning device

Has anyone installed this device?

:)

 

FULL BOAR OBD2 SCAN TOOL

i have a full boar obd2 scanner . it was working but since being unplugged it has crashed and wont link to any vehicle . does anyone have a full boar obd2 fbast-100 scan tool . and is there a downloadable pc based software program or updated driver installer i can use . i have spent hours searching to no avail. any help would be greatly appreciated . prior to crashing it was connected to a laptop and used as a data link to a great wall for immo decode but the laptop would not recognize device or allow data link it was disconnected and since then unusable the sad part is i only purchased it on the day to do the job . if anyone can help it would be greatly valued and appreciated immensely

 

Must scan device after each startup

I installed a dual serial port card in a PCIe slot in my Acer i7 desktop, Win 10 Home. It works until the computer is restarted, then device manager lists the ports as hidden and says they are not physically connected. If I right click the device and scan for hardware changes, they will work until the next time the machine is shut down and restarted. The manufacturer suggests putting them in a different slot, but that is not helpful as there is only one PCIe slot. Can anyone suggest a way of fixing this or, alternately, is rhere a way to force windows to scan devices for hardware changes at each startup? Thanks for any help.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.