Windows 10: Occasional BSOD Issue - OC 36% - Didn't cause issues before

I built my PC last year and used the Asus AI Overclocking feature to OC my system a safely as possible. It determined that the value of 36% was optimal. I've noticed however in the last few months that I get a BSOD every few weeks, and not while I'm doing anything particularly intensive.

I'm not sure if this is caused by the OC? Any way to find out? What else could be causing this?
this is what I'm getting:





these are the current settings in AI Suite 3





I'm not sure if I need to contact ASUS to try a lower setting to OC or turn it off completely... or if someone here can assist!

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Recent BSoD Issues.

Hi,

There are several reasons why you are experiencing a BSOD issue with your computer. These may include an outdated device driver or corruption within your system files. Answering the following questions may help us in uncovering the underlying cause of the
issue:

• Were there any changes made on your computer prior to the issue?
• Were you able to install all pending updates on your computer?
• What troubleshooting steps have you already performed?

Moreover, we recommend following the steps provided from this article in order to troubleshoot the issue.

Let us know if you need further help.

 

Serious BSOD Issues

Can you boot into safemode by tapping F8 on the splashscreen?

If this is possible set the power management option not to reboot on error. This way you can boot into windows regularly and get time to write down the error code.

It will say....

STOP: bla bla error, followed by a 0X000.... code. Get this and either report it here and I will help you look for the cause or put the 0x000... code in google and start reading and try to see if the suggestions fix the issue.

A reinstall would be completely worthless if it happens to be a ram issue or even the HDD can be the issue!