Windows 10: Old Mac Book HDD in doc station not popping up on laptop

I have an old mac hdd that I'm trying to recover data from. I'm using a doc and it works fine. It pops up in disk management as Disc 1, but not as a separate drive. I'm not sure where to go from here as this is about as far as my tech knowledge can take me. Any help or insight would help, thank you!

:)

 

Cleaning off a Mac Laptop

cleaning it?

Step 1: buy about a half gallon of gasoline.

Step 2: douse laptop in gasoline.

Step 3: toss a burning match onto laptop.

Step 4: watch the fire clense your laptop.

 

DVI not working on extended monitor with Surface Book docking station

Hi,



Thank you for posting your query in Microsoft Community.



I understand your concern and will assist you to resolve this issue.

I suggest you to follow the steps below and check if it helps.

• 
  Make sure the power light for the docking station is on
  
• 
  Make sure the monitor is getting power
  
• 
  Make sure the cable is connected properly to the monitor
  
• 
  Unplug and reconnect the Mini-DVI adapter on the back of your docking station
  
• 
  Try flipping the connector for the adapter over (turns out some adapters can go in upside-down)
  
• 
  Take the Surface out of the docking station then put it back in
  
  
  

Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help.

 

Laptop goes to sleep after undocking it from the station

Power troubleshooter came up with nothing.

Here is what I mean by machine does not come back up. Step by step process of what happens:

• Computer is on an plugged into docking station.
• I press the eject button on the docking station and the laptop is released. (Note I have also pressed the power button on the docking station first which makes the screen go black, but that does not change the rest of the flow)
• Take laptop out and leave out overnight.
• Come back in the morning plug laptop back into docking station
• Power light on laptop is slowly blinking red
• Move mouse and type on keyboard - nothing happens
• Press power button on docking station - nothing happens
• Open laptop lid (while still in docking station) - nothing happens
• Press power button on laptop - nothing happens
• Press every key on laptop keyboard (including function keys) - nothing happens
• Light is still blinking slowly on laptop all monitors are black
• Press power button on docking station (or laptop) and hold down for 10 seconds - power light stops blinking
• Press power button again - laptop boots. When I log-in all applications that were open are now closed and I get warning about unsaved data when I open applications.