Windows 10: Onboard Graphics after 2004

I have a bunch of sff 9020’s and after 2004, the onboard intel isn’t showing in device manager and I’m not seeing any unknown devices. My bios is set to auto and multiple displays so that’s not the issue but nothing comes up when it’s plugged into the onboard ports.

Any ideas? It was fine under all builds since 1709 and it’s multiple computers and different cables.

submitted by /u/Internetuser1234321
[link] [comments]

:)

 

disabling gpu and activating onboard graphics

how do I disable graphics card and activate onboard graphics

 

Onboard graphics not working after windows update

I use my onboard graphics for a second monitor. After updating windows, it no longer works. I have tried swapping the monitors out and both work fine when plugged into the GPU, but when plugged into the onboard, neither is detected. I tried checking the bios to make sure that it didn't somehow get disabled and it is clearly enabled. The Intel HD Graphics 630 is clearly visible in Device Manger as well, and all drivers are up to date. I'm not sure why windows now can't detect any monitor plugged in there.

 

Windows 10 not recognizing second monitor plugged in Onboard Graphics

I would suggest checking your UEFI settings.sometimes there is an option named iGPU - multi monitor or similar,under chipset settings so that when you have a PCIe GPU the onboard graphics get disabled.

1)Check UEFI settings,try making onboard as primary

2)Check iGPU and discrete are working properly ( through device manager)

3)I wouldn't reccomend any VGA - HDMI adapters since analog to digital and reverse usually doesn't work very well ( in my experience at least)