Windows 10: one drive is not working on my pc having window 7 pro window. it is showing one drive is...

one drive is not working on my pc having window 7 pro window. it is showing one drive is not connected

:)

 

Windows 7 Professional keeps dropping the DVD/CD drive

Working with a fresh install (2nd attempt) of Windows 7 Professional on new hardware. The motherboard is a Gigabyte EP45-UD3P. Running 4G of RAM and an Intel Q9400 Quad Core CPU. The DVD/CD optical drive is a Pioneer DVR-218L.

Here's the problem - after two fresh installs, Windows 7 drops the DVD/CD drive and I get the following error in Device Manager (The device cannot start {code 10}). After the install, the drive works for a period of time, then stops working and I get the error code.

The driver appears to be a standard Windows driver (CD-ROM driver).

I've tried uninstalling the drive and re-installing it in Device Manager but it does not work - I continue to get the device error.

I've also swapped out the DVD/CD drive to insure it's not a bad unit. Same problem with both drives.

What do you suggest for next steps?? Could it be an issue with the motherboard?? A driver problem?

I visited the Pioneer web site - could not find any help or additional Windows 7 drivers.

What now??

 

Windows 7 booting off wrong drive?!?!?

Please move if this is in the wrong place.

I have two hard drives, a 1.5TB drive, and a 160GB drive. Windows is installed on the 1.5TB drive, as are all my files and programs. The 160GB drive has a bunch of old files, and apparently the bootmgr and boot folder. Nothing else is on the 160GB drive, other than media files etc.

If I remove the 160GB drive from the machine, windows refuses to boot, plug it back in, it works fine. The setup with two hard drives I have now is temporary, as the 160GB drive will go into another machine.

My question is, can someone give me a step by step on how to make windows force to boot off the 1.5TB drive, ignoring the 160GB drive in the boot process completely?
I don't know how to do this in Windows 7, on XP I would just run the /fixmbr command and its related ones.

Any help would be appreciated.

Note: I would really really rather not have to wipe and reinstall, I know it can be done without one as I've had this issue with XP before.

 

Installing Windows 7 via USB flash drive!

USB drive doesnt show up, even after a format through windows (XP)

Any suggestions?