Windows 10: One drive local data lost

Good dayI lost all my local data Photos, documents, etc. after deleting one drive from my PCI ran multiple recovery tools and had no successI just need to albums recoveredPlease HELP!

:)

 

Lost data from hard drive, what to do now?

Well, I'm sorry to hear that it's a WD My Passport that failed on you, @tomhenry ! *Frown
I'd recommend you to try using a different USB cable with it and see if that will help your system to detect it without it disconnecting.
I'd also suggest you to go to Disk Management and see how the drive is listed there. It won't hurt to check up on the health and SMART status of the HDD by running the QUICK and EXTENDED tests from the WD's Data LifeGuard Diagnostics. Here's a link to the available software: http://products.wdc.com/support/kb.ashx?id=11ZOpD

Give these troubleshooting steps a try and keep us posted with the results!
SuperSoph_WD

 

Lost space of Pen Drive

Hello,

Thank you for bringing up your query on Microsoft Community.

We regret the inconvenience caused to you.

• 
  Have you tried connecting to a different computer?
  

I suggest you to connect the USB flash drive to a different computer and check.

First back up all the data from your USB drive to another location.

I suggest you to connect the USB flash drive to a different computer and check.

Let us try the following steps, and check if it helps.

Step 1: I suggest you to refresh the drive letter and then try to rescan the drives that are connect to the computer and check.

To refresh drive letter:

• Open Computer Management (Local).
• In the console tree, click Computer Management (Local), click
  Storage, and then click Disk Management.
  
• Click Action, and then click Refresh.
  
• Once you have refreshed connect the new zip drive and to update hardware information, click Rescan Disks instead.
  

Step 2: For unallocated space on USB drive

• 
  Press the Windows key, and type Diskpart.
  
• 
  Click the result to open the DiskPart command prompt window.
  
• 
  In the command prompt window, type list disk and hit Enter.
  
• 
  The removable USB drive or hard disk will be shown under
  Disk 1.
  
• 
  Type in the following commands and hit Enter.
  

select disk 1

Clean

create partition primary

• 
  The first command selects your removable USB drive.
  
• 
  The Clean command deletes all the current partitions present on the USB drive.
  
• 
  The Create primary partition creates a fresh partition and allocates all the unallocated space on this fresh partition.
  
• 
  Type Exit to close the command prompt window.
  
• 
  Unplug your USB drive and plug it back again.
  

Hope it helps.

Let us know the status, we are glad to assist you further.

 

[solved] drive/partition totally missing after errant diskpart clean

The problem w/ that software is the same that I have already listed with other things I've checked: the drive doesn't APPEAR. I see my C: drive and any USB drives I've plugged in, but my original D: drive doesn't exist for the Easus Data Recovery Wizard. So, I don't even have an option of overwriting my old files this way. Thanks for the suggestion, though.