Windows 10: One volume shown in multiple hard drives.

I have one drive which is showing itself in multiple hard drives and one volume is split into different parts. The F: partition is shown in multiple hard drives and all are shown in multiple parts in same drive also.

:)

 

Unable to create simple volume on new 1TB hard drive

Just got a brand new HP computer with windows 10 Pro (64bit) preinstalled on an SSD. I am now adding a 1TB sata hard drive for storing data files. New HDD is installed as Disk 1 and is seen by Windows 10. I initialized it as an MBR basic disc. When I try to go to the next step of creating a volume, I right click on disk 1 and there is no option available to create a new simple volume. There are other volume options (mirror, raid, etc) but they are all greyed out. Simple is not even listed as an option. I went to DISKPART and using clean command, took it back to the start, then initialized it as a GBT. That didn't make a difference. Now I'm back to MBR again. I also did a List Volume command under DISKPART and confirmed there is no volume on this drive. I'm stuck. How can I get this drive to the point where I can format it and use it?
Thanks!

 

Toshiba Ext Hard Drive

Hi Tony,

I realize that you are facing the issue connecting the external hard drive in Windows 10, let me assist you.

To assist you better, let us know the following details.

• Which build of Windows 10 is installed in your system?
• What is the make and model of your system?
• Do other USB devices are getting connected to the system?

As an initial step if troubleshooting, I suggest you to try connecting the external hard drive through different USB ports and check if it is getting detected, also try connecting the same external hard drive to a different Windows 10 system.

Also, connect the external hard drive to the system and check whether the device is shown in Device Manager.

• Type Device Manager in the Search bar and press
  Enter key.
• Click on View option and click on Show hidden devices.
• Check whether the device is shown.

Hope the information helps. Kindly write back to us with the updated status of the issue for further assistance on Windows. We will be glad to assist you.

 

Overclock your hard drive!!!

Heres a much easier hack that I realized quite a few years ago that really does work!

REQUIREMENTS:

• Hard drive with molex power connection.
• PSU with more than 1 strand that has molex plugs on it.
• Wire strippers, soldering iron if you're fancy, electrical tape if you're not.

STEPS:

• Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
• Cut the yellow and orange cables, then twist them together.
• Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
• Plug in a drive and feel the speed!

Congratulations! You've just overclocked your hard drive!