Windows 10: Onikuma K8 headset microphone not working on Windows 11

I recently bought an Onikuma K8 headset and cannot get my headset's microphone to work. The headset its self works, i can hear anything in any of my games, i just cant talk. The microphone is being recognized as the audio device my pc has Realtak HD audio yet when i choose it I can't talk. I have already done the following without it working.Reset my computerMade sure my headset wasn't mutedAllowed access to microphone on all appsMade sure it was plugged into the right ports with an adapter splitterUsed sound troubleshoot featureWent into the sounds menu and set the headset microphone to mai

:)

 

headset microphone not working

Hi

Welcome to Microsoft community.

Given the steps you've already taken, it seems you've covered the basic troubleshooting methods. However, there are a few more things you could try before concluding that the headset's microphone is broken:

1. Test the Headset on Another Device:
   
   • If possible, plug your headset into another computer or a compatible device. This can help determine if the issue is with the headset itself or your computer.
     
2. Inspect the USB Port:
   
   • It's possible the USB port might have been damaged when the headset was tugged out. Try using the headset with a different port, which you've done, but also check if other devices work correctly in the same port where the headset failed.
     
3. Disable USB Selective Suspend:
   
   • Go to Control Panel > Hardware and Sound > Power Options.
     
   • Click on “Change plan settings” next to your current power plan.
     
   • Click on “Change advanced power settings”.
     
   • Expand “USB settings” and then expand “USB selective suspend setting”. Set it to Disabled.
     
4. Check Sound Settings in Control Panel:
   
   • Go to Control Panel > Hardware and Sound > Sound.
     
   • Under the Recording tab, right-click an empty space and make sure "Show Disabled Devices" and "Show Disconnected Devices" are checked.
     
   • If your microphone appears, enable it and set it as the default device.
     
5. Try a Different USB Cable (if detachable):
   
   • If your headset uses a detachable USB cable, the cable itself may be faulty. Try a different USB cable if possible.
     
6. Update Motherboard USB Drivers:
   
   • Sometimes, the issue might not be with the device but with the USB drivers of your motherboard. Visit the motherboard manufacturer's website to download and install the latest USB drivers.
     
7. Check if the Microphone is Disabled in BIOS/UEFI:
   
   • Although not common, some BIOS/UEFI settings might have options to disable microphone input for privacy reasons. Check your BIOS/UEFI settings to make sure the microphone or audio input is not disabled.
     
   • Disclaimer: Microsoft provides no assurances and/or warranties, implied or otherwise, and is not responsible for the information you receive from the third-party linked sites or any support related to technology.
     
     If you are going to modify BIOS Settings, please back up all your personal files first to ensure you do not lose data.
     
8. Use a USB Hub with External Power:
   
   • In some cases, the problem might be due to insufficient power being supplied to the USB ports. Using an externally powered USB hub could help in such situations.
     

If after trying these steps, the microphone still doesn't work but is recognized by your PC, it could indeed be a hardware issue with the microphone component of the headset. Given that the audio playback works fine, it points towards a problem isolated to the microphone. In such a case, contacting the manufacturer for a warranty claim (if applicable) or considering a new headset might be the next steps.

Let me know if you need further assistance.

Best regards

Derrick Qian | Microsoft Community Support Specialist

 

onikuma k9 headset doesnt detect plugged in in my laptop.

Thanks for the clarification.

You will not need to use the Onikuma driver for this headset specifically. This is because its USB is only for powering the RGB LEDs.

In your case, the driver that will be used is from Realtek. This is because the device's Combo Jack port is controlled by the device's Realtek audio controller. The Onikuma driver will be of no use in your case.

It is normal in this case that there is no mention of the brand of the headset on Windows settings.

When connecting the headset using the adapter to the laptop's Combo Jack port, can you hear the audio played by the system?

If yes, see if the microphone works as well.

I await your reply. Click on the "Reply" button below my reply.

 

Sennheiser GSP 350. Microphone stops working when I open any game

Wow, ok. I think I've fixed it by accident while fiddling around.

It appears to be the Realtek audio being the issue here. I don't use my onboard sound card as my headset is a USB headset only and my speakers are plugged into an ASUS sound card.

Step by step fix:

• I went into recording devices
• I enabled STEREO MIX (Realtek High Definition Audio)
• Then I set that Stereo Mix as the DEFAULT DEVICE (At this point it took over both input and output devices without my permission )
• Then set my Sennheiser headset as default recording and playback devices in their respective windows even though they both still said they were the default devices when they weren't

Headset microphone is currently functioning while in game now. I'll update the thread if it goes again. Should I completely disable Realtek audio??? Or will windows just force it to work again?