Windows 10: Original Windows 10 USB stick not working.

Hi guys.


Trying to do a clean Windows 10 install on my PC.. But the following Error message appear during install: 0x80070570.


I've tried changing the SSD and RAM, changed settings in BIOS and done the Diskpart rutine to no avail.

Frustrated and looking for a quick fix, i tried installing on an other PC and got the same message, and then a third PC..

I've tried installing using all 3 of my Original Windows 10 sticks, on 3 different PC's and same Error.

Ive used the sticks "all 3" a few times, so i know for a fact they "used" to work.

Question is.. are they "bricked"? And is there any fix to my problem?

Ps. Tried downloading Microsofts tool for creating a new Windows 10 USB stick, and.... dosnt work.

Stops during creation of the image with an error.


Best regards.

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks

 

Is it possible to install Windows 10 in UEFI mode using the original USB stick?

Same problem here. I bought windows 10 home on USB stick. USB stick is recognized in Legacy BIOS mode only. In UEFI mode isn't visible. I made my own bootable usb drive - I copied files from Microsoft’s drive and it works fine – Legacy and UEFI mode woking.

Why original USB stick not working in UEFI mode? (tested on PC and notebook – both UEFI capable)

USB Stick is useless in this form...