Windows 10: PC been randomly crashing after Sleep-mode and shutdowns - Today, I got BugCheck 1001...

Hi everybody;


Hope you guys can help, since I can't seem to figure out what is wrong with my PC. So, to sum up, my PC crashed after been in sleep mode for about an hour, about 2 weeks ago; It have never been crashing before, and been working like a dream, ever since I built it. After the first time, it now, two times have crashed right at booting. On a cold start Started for the first time after beeing turned off for minimum 6 hours it crashes at the Windows-start up/BIOS-button screen. First time it did so, only Kernel-Power 41 showed up in the Event Viewer, and a HID-complient headset driver, that failed. Turned that driver off, and have not got the headset driver error since, and not today neither. But then, today, trying to turn on the PC, it did the exact same thing.. Hit the power button, turned on and lighted up, turned on the screen and showed the Motherboard-screen, and then turnes off. I have noticed the two times it have done so, it was just a little bit slower to get to the Windows start-up screen, but at max a couple of seconds slower.. This time, the error 'BugCheck 1001, 0x000000a0 is in the event viewer. I have quoted just the top of the minidump file below, if you need more of it, or the whole file, feel free to ask for it. Important note is that after the imminent crash, it turns on afterwards with no issues whatsoever..

In short; crashed 3 times in total, all with different cricital errors in the Event Viewer. This time with BugCheck 1001 0x000000a0


Really hope you guys can help me out!
Thanks in advance!


Running Win 10 Pro version 19042.804


******************************************************************************** ** Bugcheck Analysis ** ********************************************************************************INTERNAL_POWER_ERROR a0The power policy manager experienced a fatal error.Arguments:Arg1: 000000000000010e, The disk subsystem returned corrupt data while reading from the hibernation file.Arg2: 000000000000000aArg3: 0000000000000ec7, Incorrect checksumArg4: 000000000000589c, Previous disk read's checksum

:)

 

Laptop gets in to sleep mode randomly

Hello,

it might help you

• PC going into sleep mode randomly even if in use

 

PC going into sleep mode randomly even if in use

I downloaded and installed the display driver with no luck. It's still going into sleep mode randomly.

Any other suggestion I can try? Thanks

 

Persistent Crashing While Sleep Mode - Bug Check

Hello folks! I'm having a concerning issue with my recently built Windows 10 machine. Below are my system specs, symptoms of issue, steps to reproduce, troubleshooting steps taken, and an attached minidump (MEMORY.DMP).

System Specs

CPU: Intel i9 9900k @ 4.7ghz

Mobo: ASUS ROG Maximus XI Hero (Wi-Fi)

RAM: 4x8gb Corsair Vengeance RBG DDR4-3600 C18 @ 3200mhz [XMP Profile]

GPU: EVGA RTX 2080

All drivers are up to date and verified intact

Symptoms

• When attempting to sleep, computer will frequently sleep fine for up to 3-4 hours, waking as normal.
• However, when gone and set to sleep for 6+hrs, system is off and boots cold.
• Event Viewer inconclusive, reveals that prior shutdown was unexpected, did not cleanly shut down, and generally indicates a crash.
• Event Viewer reveals Error Level Event:
  • "The computer has rebooted from a bugcheck. The bugcheck was: 0x00000133 (0x0000000000000001, 0x0000000000001e00, 0xfffff8012126b378, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 7a6ff501-6edc-4660-907b-23ae49f400a1."
• Specific bugcheck code varies. Most frequently 0x00000133 and 0x00000001.

Steps to Reproduce

1. Initiate sleep
2. Wait several hours (most recent occasion was 7.5hrs)
3. Attempt to wake, find powered off
4. Boot cold

Notably, problem presents regardless of if computer entered sleep from inactivity or if manually set to sleep.

Troubleshooting Steps Taken

Steps taken in rough order:

1. Disable Fastboot in both BIOS and Windows
2. Disable Hibernate
3. Check powercfg for wake requests (find none)
4. Disable all possible wake requestors (notably network wake)
5. Verify driver integrity and updates
6. Verify disk and operating system integrity
7. Verify memory function with memtest86 and other stress testers (Passed with flying colors)
8. Verify CPU and motherboard function with stress testers (Passed with flying colors)
9. Disable all overclocking and repeat testing

So far, none of these troubleshooting steps have resolved the sleep issue.
I've attached the most recent MEMORY.DMP here.

I'm at wits end. As a layperson I've done all the troubleshooting I can reasonably find recommended. I've been unable to find any additional leads online to try anything else. Please help!