Windows 10: PC Bluescreens after instsalling new SSD

I have installed a new NVMe M.2 SSD into my mainboard using a pcie adapter.And ever since, when i start my pc it turns itself off after 2 seconds, stays off for 2 and then boots into bluescreen.Errorcode: DRIVER_IRQL_NOT_LESS_OR_EQUALReason: nvme.sysAfter that it restarts and then starts normally.What can i do o fix it ?

:)

 

New Windows 10 PC Bluescreens when idle

I have a brand new build, Windows 10, Asus Z170-P motherboard, 12gb corsair ddr4, GTX 950, 1TB hard drive. Whenever I leave it idle it seems to bluescreen. This can happen after 20-30 minutes or not for an hour or more. Usually when I'm using it actively playing games it is fine. The bluescreen bug check string is various things from MEMORY_MANAGEMENT, IRQL_NOT_LESS_OR_EQUAL, BAD_POOL_HEADER and a few others.

The minidumps for all the recent bluescreens are here:
https://drive.google.com/file/d/0B-wOckrdsYnYWG5RYlVOMF9xaTg/view?usp=sharing

Things I've tried:

• Updating all my drivers, particularly the asus chipset drivers
  
• Running Memtest overnight (7 passes in 9 hours, no issues found)
  
• chkdisk (via windows 10 tools)
  

I really am stuck now. I took it back to the store where I bought all the parts and they said they tested it and it's all fine (they updated the chipset drivers again even though I had already done so) and for them it was running for 2 hours with no bluescreen.

If anyone has suggestions I'd be really grateful because I've run out of ideas!

UPDATE

Memory timings from CPU-Z added below:

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Windows 10 crashes in Startup and Autorepair. With Bluescreen Errorcode SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

I was just shutdown PC and is crashed with this Bluescreen Error Code: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Then is restarting and crashes with the same Bluescreen Error Code. After 5 times Bluescreen, Automatic Repair. Well you will thinking: "Automatic Repair will fix your PC and then all done". Well thats wrong, is just crashed with the same Bluescreen Error Code.

After 50 times Bluescreen, is still crashes with the same Bluescreen Error Code. Then there is only one way too repair PC.

Didnt work. I want reinstall Windows 10 but, guess what, crash. Then i remove the SSD and is booted up, with Windows 10 Installation DVD, and it worked, then i pluged the SSD in my PC and, oh well, it crashed...

After over 100 times Bluescreen Error, without the Windows 10 DVD. The PC normal booted up. Is doesnt crashes anymore, is just loading... very long... very very long... I guess it was over 30 Minutes. I want force shutdown my PC because, is too long. I booted in Windows 10 DVD andddddddd... Ah not again, is still crashed with the same Bluescreen Error Code.

• Windows 10 installation USB/DVD doesnt work.
  
  • My PC doesnt support USB boot.
    
  • DVD doesnt work, it will just crash.
    
• Windows 10 Automatic Repair doesnt work.
  
• Windows 10 normal Boot doesnt work.
  

• Booting in HDD (not the SSD) (Windows 8.1/10) and it worked, but i want my data .
  
  • The PC will check my Harddisk and repair but without the SSD.