Windows 10: PC boots very slowly and BIOS menu freezez for 10 seconds

Hello!I have a problem that started recently. My PC used to boot up in 10 seconds, but now it takes almost a minute to start the PC is just 1 years old. I tried to look for something in the BIOS menu, but when I entered, after one second it freezed for 10 seconds. Then I managed to move my mouse for one second and it froze again for 10 seconds. It did it periodically, not randomly and honestly I have zero clue what's going on I'm not so professional with computers anyways. After booting up, the PC works normally.If you can help me, I thank you for anything.

:)

 

Windows stuck in automatic repair; Can't access BIOS/ boot menu

I've changed the boot order through both BIOS and the boot manager, as my original post stated. Neither did anything, but both were functional in the past. Neither listed the windows boot manager, either. Previously, it would boot just as expected whenever
other media was set as the first option, so I'm pretty sure there are no issues there.

As my original post suggested, I've already tried out the steps you gave. I've gone through all the options listed in the boot menu, UEFI or not.

My BIOS and boot menu settings were at their defaults when all of this started, so that's been tried already, if those are what you're referring to.

 

No startup boot menu

Hello Kimoefat,

Thank you for posting your concern in Microsoft Community and welcome to the Windows 10 Family.

As an initial recommendation, I would suggest you to access the System configuration utility and check if the Operating System installation path for Ubuntu exists. To do so, follow the below steps.

• Type msconfig in the search bar and select System Configuration from the search results.
• Select the boot tab in the System configuration console to check if the installation path for Ubuntu exists.

If it exists, next logical step is to check if the boot menu time out has been set to 0, which results in Boot menu not showing up.

The boot menu time-out determines how long the boot menu is displayed before the default boot entry is loaded. It is calibrated in seconds. To change the boot menu time-out, use the Bootcfg
/timeout switch. Valid values are from 0 through 999. You cannot use Bootcfg to set an indefinite time-out.

You can run the following Run command line to set the boot menu time-out accordingly. To do so, follow the below steps.

• 
  Press Windows key + X, select
  Command prompt (Admin) to bring up elevated Command prompt
  
• 
  Type in the following command: bootcfg /timeout 10
  
  timeout 10 will set the time frame to 10 seconds
  

However, if the Boot path for Ubuntu does not exist in the boot menu of System Configuration utility, I would suggest you to check if the Ubuntu is overridden by the Windows installation or if the Ubuntu installation files are corrupted.

Hope the above information is helpful. If you need further information, feel free to write to us and we would be happy to help you.

Thank You.

 

Windows 10 will only boot if selected from the BIOS boot menu.

Hello,

Thank you for contacting Microsoft Community.

We understand the inconvenience you have experienced.

• You mean to say, every time you need to make changes to Boot Order in BIOS, to start your computer correctly?
• What is the make and model of your computer?

I suspect that the problem might be due to outdated BIOS update
or with Boot Configuration data. Suggest you to check for the latest BIOS update and Chipset drivers for your device hardware on Manufacturer website. If you find a new one, try to update the same to see if it correct
the issue. If problem still persist, then I suggest to rebuild Boot Configuration Data to see if it makes any difference.

Let us try to repair your computer by creating a Windows 10 Bootable media (I.e. USB or DVD) using
Media Creation Tool.
Use your computer or some other connected to Internet for creating a Bootable media (Windows 10 ISO image file). Once you're ready with Bootable Media, follow the below mentioned
steps.

• Insert the Windows installation disc in the disc drive or connect USB media, and then start the computer.
• Press a key when the message Press any key to boot from CD or DVD appears.
  
  If your PC does not detect the media automatically
  • During the restart process, read the screen for any instructions that explain how to interrupt normal startup and enter the basic input/output system (BIOS) setup utility. Most PCs use the F2, F10, ESC, or DEL key to begin the BIOS Setup.
  • Look for a tab in the BIOS Setup Utility that is labeled Boot Order,
    Boot Options, or Boot. Following the directions on the screen, use the arrow keys to go to the
    Boot Order, then press Enter.
  • Locate the CD, DVD, or USB flash drive (this might be called Removable Device) in the Boot list. Following the directions on the screen, use the arrow keys to move the drive up so that it appears first in the Boot list. Press Enter. The boot order
    sequence is now changed to boot from the CD, DVD, or USB flash drive.
  • Press F10 to save your changes and to exit the BIOS Setup Utility. Select Yes in the confirmation window. The PC will restart. Allow the PC to restart normally. The scan will take a few minutes and remove any malware that may be infecting your computer.
• Select a language, a time, a currency, a keyboard or another input method, and then click Next.
• Click Repair your computer.
• Click the operating system that you want to repair, and then click
  Next.
• On the Choose an option screen, select Troubleshoot. Select
  Advanced Options > Command Prompt
  under Advanced Options.
• Type Bootrec /RebuildBcd, and then press
  ENTER. This command will rebuild boot configuration data if in case any issue with Boot files causing this issue.

Once you done with the above steps, see if the problem still persist.

Let us know how it went.