Windows 10: pc failed to start and need to be repaired

Good Day,


BSOD error 0x0000001error shows on my win 10 Dell latitude e6440. Do I go to Dell or Microsoft for repair disk options.

:)

 

Windows won't start or repair

Hi,

This issue may occur due to a
missing/corrupted system files. We suggest that you perform these methods
of troubleshooting steps to fix this matter:

Method 1:
Run SFC Scan.

To run an
SFC scan, follow these steps:

• 
  Run
  Command Prompt as Administrator.
  
• 
  Type
  sfc /scannow
  and hit
  Enter.
  

This will check and run an auto-repair on the issue.

Method 2:
Run DISM Tool.

After running the
SFC scan
and the issue still persist, run the
DISM
to check the system health and to try restoring the files. To run
DISM tool, follow these steps:

• 
  Run
  Command Prompt as Administrator.
  
• 
  Type the following command:
  
  • 
    DISM.exe /Online /Cleanup-image /scanhealth
    
  • 
    DISM.exe /Online /Cleanup-image /Restorehealth
    

NOTE:
This might take a while to finish scanning.
Do not cancel.

Let us know how it goes.

Regards.

 

HELP! Windows 10 automatic repair couldn't repair PC. Details below

Hi Matthew,

As you are facing issue withAutomatic Repair, we would assist you for sure.

In order to understand the issue in a better manner, please share the following details

• 
  I tried system restore” What is the error exact error message you received?
  

If automatic repair fails, you may try to repair them using these commands through Command Prompt under Advanced Options. Follow the steps:

Since you have done most of the troubleshooting steps, I would suggest you to try repairing the Boot Configuration Data through the command prompt by following the steps below and check if it helps.

I suggest you re-built the boot record by following the below commands and check if it helps.

You will have to use Windows 10 installation media to follow the steps to boot into Recovery Environment and try to rebuild BCD.

Step 1: I suggest you to create an installation media for
Windows 10 using the media creation tool:

Installing Windows 10 using the media creation tool

Step 2: After preparing the installation media, insert it hard reboot the device and follow the below:

• Boot into Windows Recovery Environment using the Windows 10 installation media.
• Click on Repair your computer.
  
• Click on Troubleshoot and in the advanced options.
• Select Command Prompt. Type the following commands into the prompt and press Enter key after each command.

• 
  bootrec /fixmbr
  
• 
  bootrec /fixboot
  
• 
  bootrec /scanos
  
• 
  bootrec /rebuildbcd
  

5. Restart the computer.

NOTE: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting
from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

Hope it helps. Reply to the post with an updated status of this issue for further assistance.

Thank you.

 

Programs not working

In post 26 there were steps listed to fix the operating system corruption.
Are you able to follow them?
In post 29 was the suggested dism repair command.