Windows 10: Pc fails to boot up.

I tweaked with my virtual meomory and then i played a game and when i was playing i got a blue screen. Know when i try to turn on my pc all of my fans spin and rgb turn on and i have no display or power to my keyboard and mouse.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

HD 5870 Bios flash failed

mp3 player is in FAT / FAT32 format ?

Set Boot up first to the drive with hiren bootcd 10.4
Done...

the options will pop out after loading the disc choose

boot cd

then the list (step by step)

Next...
Dos....
USB Drivers....
Load USB Drivers with no386.....

Ask you load cd drivers. NO
Ask you load SCSI drivers. NO
Ask you anything NO.
USB driver list comes out. 8 Don't choose anything else.

type
C:\ (that should be your mp3 player if you did it right)

atiflash -i
to list the adapters

atiflash -p -f 0 ???.bin

done.........

 

Windows 10 Creators Update Installed Now PC Fails to Boot

Hi Antony,

One of the possible reasons why your PC fails to boot into normal mode are broken components on the boot configuration data of your system. To isolate your concern regarding your Windows 10 Creators Update, we suggest that you perform the following
steps to trigger Safe Mode through the
Windows Recovery Environment (WinRE) option. To do this, follow the steps below:

• Improper shutdown process
  • Turn on your computer. When the Windows logo is visible, unplug the power source of your computer. Perform this step three times.
  • On the fourth time that you turn on your computer, just simply wait for the
    Windows Recovery Environment (WinRE) window to appear.
• On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings and click
  Restart.
• Once your computer restarts, you will see a list of options. Press the
  F4 key to start your computer in Safe Mode.

We also recommend that you perform a system restore after booting into safe mode.
This option takes your PC back to an earlier point in time. Restoring won’t affect your personal files, but it will remove apps, drivers, and updates installed after the restore point was made. To do this, follow the steps
below:

• Right-click the Start button, and then select Control Panel.
• Search Control Panel for Recovery.
• Select Recovery > Open System Restore > Next.
• Choose the restore point related to the problematic app, driver, or update, and then select Next > Finish.

Let us know if the solution above works for you.