Windows 10: PC Fans go full speed while USB ports and internet disconnect.

Hello, I have recently started having this problem where my PC disconnects from the internet and USB ports while the fans are going full speed. This has been an ongoing issue and is getting quite annoying. Usually when I'm gaming, or just watching YouTube this happens and the only thing to fix it is to hard reset my PC Since my mouse doesn't work because it disconnects the USB ports. The annoying part about it is that it could happen at any moment, it doesn't do this at a certain time, it just does it randomly. It started happening a couple of years ago, but then I reinstalled Windows and al

:)

 

USB Port Oddities


Ok, let's see it with pictures step-by-step. First right-click on the USB device and select Update driver software:





Then select Browse my computer for driver software (LAST option) :





The select Let me pick from a list of device drivers on my computer (LAST option) :





Then select the standard driver from the list and click next:





Click next/OK as required to complete installation. Repeat the steps for all Intel USB devices. Finally click on each USB root device and press DEL to delete it, reply YES when asked. After deleting all USB root devices restart the computer.

I hope this is detailed enough...

 

Intermittent loss of USB devices/ports

Hi,

Thank you for posting your query on Microsoft Community.

I regret the inconvenience caused to you. Let me help you.



If the USB device does not display in Device Manager, then there might be a power requirement issue.

Disconnect the device and perform the following steps until the device is detected:

1. Restart the computer.

2. Connect the device and wait 5 seconds. If the device is not recognized, disconnect it and go to the next step.

3. In Windows, search for and open Device Manager.

a. The Device Manager window opens.

4. Double-click Universal Serial Bus Controllers to expand the list.

5. Double-click a USB Root Hub, click the Power tab, and then click Power Properties.

6. Devices that are attached to the hub are shown, as well as the power that they require. If the total displayed power is over 500 mA, remove the devices and use a powered hub.

7. Continue looking at the power properties of each USB hub. If the total Power Required exceeds the Total power available for the hub, then remove a device on that hub to lower the Power Required number.

8. Connect the device and wait 5 seconds. If the device is not recognized, disconnect it and go to the next step.

9. Remove high-speed USB cables that are over 3 m (9.8 ft) in length and use high-speed cables that are shorter than 3 m.

a. Only use high-speed cables shorter than 3m in length with high-speed USB devices (multifunction printers, scanners, and cameras).

10. If the USB device is connected to a USB port on a keyboard, disconnect it, then connect it to a USB port on the computer or to a powered hub.

11. There might be an issue with the USB port. Try connecting to a different USB port. If the USB device displays in Device Manager after connecting the cable to a different port, then uninstall and reinstall the USB device software driver.

12. Consult the manufacturer of the device for support if the device still fails to display.

Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help.

Thank you.

 

3.0 usb keeps disconnecting on 3.0 port

Hi,

Since you have made all the steps necessary, however the issue still persists, we suggest that you post your query in our
TechNet Forum for further assistance. Click here.



Regards.