Windows 10: Pc having BSOD problems all the time

Hey I've been trying for months now to try to fix my friends pc bud I've been having none stop problems I've replaced the CPU tried 2 GPUS an SSD and re-installed windows and I've still had the same BSOD iqrl_not_less_or_equal. And I'm stuck I don't know where to go from here.Cpu: core i7 3770GPU: Zotac gtx 1050 MB: P8P67 REV 3.1SSD: ADATA SU800I could get the mem dump but it will be hardThanks for any help.

:)

 

Weird BSOD problem


Hi Everyone,

I have a weird BSOD problem which I cannot solve for a while(it persists still after upgrade to Windows 10 from Windows 7)

The main strange thing about this is that I get BSOD only after cold boot.
So it acts like this:

1. start PC.
2. Get to Windows Logo Screen
3. BSOD
4. Restart
5. Get to menu where I can try to repair or Start NormallyIf I Choose Repair, it will fail to repair and will try to restoreIf I Choose Start Normally, it will start OK, no BSOD, can work normally, games, browse internet, everything is normal.6. Shutdown PC
7. Next time when I start is all over again i.e. Go to Step 1

I have this problem for a while, so what I tried:

1. Another Windows 7
2. Another HDD
3. Only HDD connected
4. Changed RAM
5. Tried with built in GPU
6. Upgraded to Windows 10

Result is the same as above every time.

Please suggest what could be the cause.
Logs collected with DM_Log_Collector, attached.


Thank you

PS. This thread is a continuation of this one: Frequent multiple errors BSOD. Solved - Windows 7 Help Forums the only thing changed is Windows 10 now. instead of Windows 7. If that helps somehow.

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast:

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?