Windows 10: PC IS NOT BOOTING AND FANS ARE IN MAX SPEED

My pc is not booting up and fans are in max speed i triedreseating the cpu and ram but nothing works when i reseat the ram it beeps 5 times. what can be the possible can be the possible cause of this issue and if theres need to replace some parts what parts it is?

:)

 

W10 CPU fan not boosting to max speed

Hi Pablo,

Sorry to hear about the inconvenience caused.

We would suggest you to update the following items and check the cpu fan speed and performance.

Check if there is a program to control the fan speed, may be the controller program is not compatible with Windows 10. Also check for the below list and please update it:

• BIOS.
• Chipset drivers.

http://support.lenovo.com/us/en/pro...enovo-y-series-laptops/y50-70-notebook-lenovo

If you don't find the drivers compatible for Windows 10. refer to the motherboard manufacturer website and check for updated chipset drivers and install it.

BIOS Disclaimer:

Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the configuring of BIOS/CMOS
settings can be solved. Modifications of the settings are at your own risk.

Hope this information helps, for further assistance please reply.

 

Intel i3 6100 fan running at max speed for no reason!

On December 26th, I moved my PC into a new case. For about a week, my CPU fan kept spinning at max speed for no reason and i couldnt change it in the BIOS or anything. I booted up my PC on January 2nd and for some reason, my fan was normal. A week later
today, after the new update, my CPU fan is back to spinning at 100%. My temps are very low so there's no reason for it to be spinning so fast; any help? running the stock cooler with an MSI H110M Pro-VH motherboard and a GTX 970. CPU usage in task manager
is pretty low as well.

 

Laptop fan spins up to max for no obvious reason

You don't need to check applications, etc if both CPU usage is way down and heat is way down. Its not magical

Looks like usage was checked but I don't see temperature as checked. You want to confirm temperature. If both of those are not high then its either just fan speed is set to run at max either in BIOS or some sort of software, a BIOS issue, or a fan power cable issue.

I know on my last BIOS, it would randomly max the fans for up to 15 minutes after reboots sometimes.

In theory, it could also stay max if the fan speed BIOS code got into a state where it wouldn't ramp them down.

There's not a whole lot to fan speeds. Fans, cables, BIOS, software that can change the speed, heat, and usage (likely heat in majority of situations).