Windows 10: PC is unable to start, and the automatic repair screen shows up.

Hello,Once I have logged in to my computer, the automatic repair screen comes up. I have tried most of the recovery methods and have installed Windows 10 on to my pen drive as this is the latest version that it can run. I tried to install Windows 10 using this method, but it doesn't work and the following message appears:: "system does not have any boot option. Please select other boot option in boot manager" appearsAre there any other solutions, please?

:)

 

Stuck in a loop of Automatic repair then black screen then automatic repair could not repair the PC

Hi Paul,

If Automatic Repair couldn't repair your PC, you can use
Command Prompt from the Windows Recovery Environment (WinRe) to resolve unbootable operating system issues. Please be guided by the steps below:

• Use the power button to restart your computer three times. This will start the Windows Recovery Environment.
  
• In the Windows Recovery Environment, on the Choose an option screen, click
  Troubleshoot.
• Click Advanced options and then click Command Prompt.
  
• Type the following commands and press Enter after each line:
  • bootrec.exe /rebuildbcd
  • bootrec.exe /fixmbr
  • bootrec.exe /fixboot
• Restart your computer and check if the issue is resolved.

Let us know how it turns out.

 

computer screen turns black after it shows preparing automatic repair

it shows that for about 5 seconds and then the screen turns black With a white foggy bit

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.