Windows 10: PC jumps between wifi repeaters

Hello,I recently bought a new laptop and I have a problem. I live in an apartment complex where the same wi-fi is extended by a lot of repeaters. For this reason, my laptop keeps jumping between different repeaters and channels. It sometimes connects to the nearest one with a great signal but then connects to a farther one and my internet speed drops. Is there any way for me to lock one channel/repeater?thank you.

:)

 

Setting up a wifi repeater woes - all advice appreciated!

First off, setting up a wifi repeater is one of the most ridiculously painful experiences I have ever had with tech hardware.

The needs:

... to be able to repeat the wifi output of my Netgear DG834N v1 ADSL/router to the upper floor of my house through the Edimax wireless 300M Range Extender (EW-7416APn v2). To enable my iPad2, 3DS, laptop and anything else that roams to maintain connection and not suffer dropouts.

The questions:

1. How do I know that the roaming devices are using the repeated signal from the Edimax extender and not just grasping on to the weak signal from the DG834N downstairs?

2. Some advice on the net suggest the router and the extender share the same SSID, which seems logical. However some suggest that the router and extender need to be on different SSIDs - but if this were the case surely the devices would only connect to the same SSID and ignore the other SSID?

3. If they use different SSIDs will the devices automatically pick the strongest signal and switch to whichever SSID that is?

4. Some advice suggests using the same channel number for both router and extender, which seems logical. Some advice suggests using different channel numbers for the router and extender - if using the same channel number, does this create too much data and make the connection worse?

5. If using different channel numbers, will the roaming devices automatically choose the right channel number based on connection strength?

6. While using the program WirelessMon I can see both the router and extender and their respective signal strengths, channel numbers and SSIDs - but there is no way of telling if the repeater is in fact repeating the routers signal - is there any software that will show that?

7. Is there any one trusted source for setting up a wifi repeater?

8. Will my hair grow back?

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

cannot turn off jump list

Hi Rohit,

To address this concern, we suggest that you follow these steps on how to turn off the Jump Lists on Windows 10:

• Go to Start menu, search Settings, then press
  Enter.
• Click Personalization.
• Select Start.
• Turn off the Show recently opened items in Jump Lists on Start or taskbar.

Let us know how it goes.

Regards.