Windows 10: PC keep on freezing

My Alienware fan suddenly had a loud sound, and the entire PC freezed.


Description


A problem with your hardware caused Windows to stop working correctly.

Problem signature
Problem Event Name: LiveKernelEvent
Code: 1a1
Parameter 1: ffffcb06dfd3f040
Parameter 2: 0
Parameter 3: 0
Parameter 4: 0
OS version: 10_0_18362
Service Pack: 0_0
Product: 768_1
OS Version: 10.0.18362.2.0.0.768.101
Locale ID: 1033


Description
A problem with your hardware caused Windows to stop working correctly.

Problem signature
Problem Event Name: LiveKernelEvent
Code: 193
Parameter 1: 804
Parameter 2: ffffffffc0000001
Parameter 3: 108
Parameter 4: fffff807545cb760
OS version: 10_0_18362
Service Pack: 0_0
Product: 768_1
OS Version: 10.0.18362.2.0.0.768.101
Locale ID: 1033



Problem signature
Problem Event Name: BlueScreen
Code: f7
Parameter 1: 6b53bbd0be2d
Parameter 2: 6b53bbd0be2f
Parameter 3: ffff94ac442f41d0
Parameter 4: 0
OS version: 10_0_18362
Service Pack: 0_0
Product: 768_1
OS Version: 10.0.18362.2.0.0.768.101
Locale ID: 1033

:)

 

PC Freezes

Hello,

To isolate your Windows 10 freezing issue, kindly answer the following questions:

• Aside from this error, are you also getting other error codes or messages?
• Where do you usually experience this freezing issue? Is it during startup?
• Other troubleshooting steps you've tried so far?

Looking forward to your response.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

GPU-Z 0.7.8 / 0.7.9 / 0.8.0 Bios reading not possible GTX670-solved with gpu-z 0.8.1

@Maban - does GPU-Z fail the same way for you the way it does for me? I.e. total system freeze/lockup, requiring a hard reset?

@W1zzard - I will try the suggested steps later today, as I am not near that PC at the moment.