Windows 10: pc no display after shutting down?

i closed my pc by shutting it down and when i tried opening it again it has no display i reseated the ram and bios nothing works tried removing gpu and using motherboard still no display?pc sepcsprocessor i7 9700gpu getforce rtx 1650more details in the pic i took before it not displaying

:)

 

Display was not migrated

Hi,

I understand the above solution didnt work so as to next step in solving your issue I suggest you follow the below.

Step 1:

Go to search box next to Windows icon and type Device Manager

Step 2:

Under Device Manager expand Display Adapter

Step 3:

Right-click on Adapters listed one by one and select Properties

Step 4:

Select the Drivers tab

Step 5:

Click on Uninstall Device

Step 6:

Repeat step 3 to 5 for all listed adapters under Display Adapter

Step 7:

Restart PC and verify

Let me know the status after performing the above.

Regards

Shuaib

Independent Advisor

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.

 

Microsoft Display Adapter not getting connected to PC

Hi,

Thank you for posting your response.

I would suggest that you follow the steps below and check if you can find the adapter in Device Manager.

1. Right click on the Start Menu and then click on Device Manager.

2. From the list of Hardware, find the Microsoft Display Adapter and check if you can find the device in question.

I would also suggest that you follow the troubleshooting steps provided in the first link and check if it helps.

Vanessa