Windows 10: PC not booting. Bios corrupted

My HP Pavilion 350 G1 i7 4500u is not booting after I did an automatic restore. I found out that the BIOS has been corrupted. I did a BIOS recovery using a USB drive by downloading from HP driver and software. But it's still not working. My PC is in windows 10 and the BIOS on HP help center is Windows 8.1 please how can make my PC boot. Please I need help urgently. Thank you

:)

 

Can VGA BIOS get corrupted?

VGA BIOS's can certainly get corrupt... although im not sure whether its possible to while ur loading stuff... i woulda thought its main "danger" time would either be flashing the BIOS (obviously its most dangerous time) or while the card is at its peak of booting from the BIOS (doubt that'd corrupt it though........)

my recommendation would b if TPU has ur cards bios in there database.. try downloading it & get some software (either a TPU article or a google seach will find enough info) to flash it 2 ur card...

i cant guarantee that this is the problem.. but if it were me.. these are steps i'd probably take...
or u can wait for some other suggestions...

 

bios

Hi all i am new in this forum, i need meanings step by step of each item listed in the bios Phoenix-Award

 

My pc will only turn onto the bios settings

If your PC is only turning on to the BIOS settings and you are unable to boot into Windows, it may be due to a hardware issue or a problem with the operating system. Here are some steps you can take to try and fix the issue:

1. Check the boot order in BIOS:
   

• Enter the BIOS settings by pressing the appropriate key (usually F2 or Del) during startup.
  
• Look for the "Boot" or "Boot Order" section and ensure that the hard drive or SSD that contains the operating system is set as the first boot device.
  
• Save any changes and exit the BIOS.
  

1. Check for loose connections:
   

• Turn off your PC and unplug it from the power source.
  
• Open up the PC case and check all connections between components (such as the hard drive or SSD and the motherboard) to ensure they are properly seated.
  
• Close the PC case, plug it back in, and turn it on to see if the issue is resolved.
  

1. Perform a startup repair:
   

• Use the Windows installation media (such as a USB drive or DVD) to boot into the advanced options screen.
  
• Select "Startup Repair" and follow the prompts to attempt to repair any issues with the Windows operating system.
  

1. Reinstall Windows:
   

• Use the Windows installation media to perform a fresh install of the operating system.
  
• Note that this will erase all data on the hard drive or SSD, so make sure to backup any important files beforehand.
  

If none of these steps solve the issue and you continue to see the "no bootable device detected" message, it may be due to a hardware failure such as a faulty hard drive or SSD. In that case, you may need to replace the failing component or seek professional assistance.