Windows 10: PC not starting after reset

PC is not starting after reset even with a bootable or force start for 20 times the only thing that appears on the screen is black screen with a cursor my bios is not working as well what should I do now, I don't know if the reset is complete or not

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

can i reset my pc from the os after downloadind windows 10 from the website

Hi,

Welcome to Microsoft Community.



I understand your inconvenience. We will assist you to resolve this issue.



Yes, you can reset the pc from windows 10 after updating I suggest you to refer the steps given below.

• 
  To go start.
  
• 
  Go to Settings.
  
• 
  Click on Update & security.
  
• 
  Click on Reset this PC.
  
  
  

I suggest you to refer the below link and follow the steps for reset pc and refer the options.

Recovery options in Windows - Microsoft Support



Hope this information is helpful. For any further assistance on Windows, feel free to post your query on Microsoft Community Forum.

Thank you.

 

Unable to reset the pc

Hello,

If you are having that message while trying to reset your computer, We suggest you to create an installation media for Windows 10 using Media
Creation Tool and perform a Reset.

Once the installation media is created, follow the steps below:

• Insert the installation media you created, and then restart your PC.
• On the Install Windows screen, select Repair your computer.
• On the Choose an option screen, select Troubleshoot. From there, you can use Safe Mode. Select
  Advanced Options >Reset This PC>Remove everything.
• After the reset is complete, check for status.

Give us an update on what happens.