Windows 10: Pc not turning on

So i was watching youtube and got a blue screen saying Volmgr.sys so i restarted then clicked on continue with windows 11 and then i logged in and thought maybe it was a bios problem i went and clicked restart pc and kept clicking delete but it didnt go to bios instead i am in a “stuck” position where my pc is turning on but there is no display on my monitor note: my keyboard has rgb and when the pc is on it is on but the rgb is off and my fans spin and all the pc rgbs are on but there is no display and i tried other keyboards and i cant do anything. So i clicked on flash bios on my motherb

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

PC Build Steps

1.1 - Ideally put optical in SATA 0, and SSD in SATA 1, this will cause the optical drive to be the default 1st boot option. You can change it manually if not, but I like it this way
2.infinity - yes, that's fine. if it's above 70 +/- 5 degrees, then it may just need a repaste/remount

 

Display does not turn off when pc is idle

Just did all the suggestions. Did not work. Display does not turn off.

This issue was from the beginning when I downloaded Win 10. I had Win 8.1 and the display always turned off as I set it.

My pc is HP Pavilion Touchsmart 23 all-in-one. According to "checking for updated drivers on display and monitors", I always get the response that the drivers currently installed are the correct ones.