Windows 10: PC randomly turns off while gaming after new SSD

So I used to have an issue with BSODs before buying a new SSD today. This seems to have fixed the BSOD problem, but now my PC is just randomly shutting down when gaming. I monitored the temps and they were all fine. I don't see how this could be a hardware issue, because it only started happening after I replaced my HDD with a new SSD. I need some help please, thanks.

DESKTOP-1QLACLK-Sat_02_10_2018_202049_76.zip

Specs: w10, Intel i7 3770 CPU, Seagate 1TB HDD, GTX 750 Ti Windforce GPU, Kingston KVR1333D3N9 4GB RAM x2.

:)

 

Bluescreen: Watchdog Violation

thanks for the fast respond,

to the first question: Windows says it would be up to date.

to the secound question: i updated them 3 weeks ago and there weren't no new ones for the Intel SSD NVMe

to the third question: randomly, some times while gaming from the NVMe Intel SSD, some times while Idle or browsing.

i'll try the "troubleshooting" link

Edit:

After reinstalling of the NVMe Driver the crash periode is much shorter than before, (before every 2h, after every 20min)

 

PC freezes randomly (Intel 6600k, z170, windows 10)

Hi,

My new PC has been freezing randomly even when it is not under heavy load (it even happened when I was writing this post), my build is this:

gigabyte z170n-gaming 5

Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 2666MHz (PC4-21300) C16

Intel Boxed Core I5-6600K 3.50 GHz cooled with Corsair Hydro Series H55

EVGA GeForce GTX 950 2GB SC+ GAMING

EVGA 700B bronce PSU

Samsung 840 EVO 250GB 2.5-Inch SATA III Internal SSD

Windows 10 64 bits

The CPU is around 68 F, the motherboard 83 F and the GPU 106 F. I have changed the power setting "Turn off hard disk after" to never, as i read that this may be an issue. I have to turn off the PC since reset is not even working when it happens.

Any help or advice is appreciated.

Thanks.

Fernando

 

There were no bugchecks or dumps to debug.
The logs were only for 2 days 2/10 - 2/11 2018.

1) Please update the specs in the "My Computer" section:
System Specs - Fill in at Ten Forums:
System Specs - Fill in at Ten Forums Site Use Tutorials
In the left corner below in your post you find 'My System Specs'.
After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
System Info - See Your System Specs - Windows 7 Help Forums

Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, etc.)

For any test / steps please post images into the thread.
If there are any problems posting images please use one drive or drop box share links.

1) Backup all files on the drive to another drive or to the cloud
2) Make a backup image using Macrium:
Macrium Software | Macrium Reflect Free
3) Make a brand new restore point.

4) In the left lower corner search type: system > open system control panel > on the left pane click advanced system settings > under startup and recovery click settings > post an image into the thread.

5) Run this version of the log collector now and post an image into this thread:
og collector v2-beta08.zip

6) Windows driver verifier is a tool which is used to stimulated drivers.
It will repetitively make drivers produce BSOD until misbehaving drivers are fix or until the tool is turned off.

7) Before using the tool make sure that you understand the multiple methods to turn off the tool using the Windows advanced troubleshooting menu.

8) Use this link for the customized test settins:
Driver Verifier-- tracking down a mis-behaving driver. - Microsoft Community

9) Use this link to learn the methods to turn off the tool:
Enable and Disable Driver Verifier in Windows 10 Performance Maintenance Tutorials

10) While using Windows driver verifer there can be problems with sluggishness or prolonged boot times.
If these problems happen report that into the thread so that the customized test setting can be modified.

11) The tool will be used for 48 hours. After the last BSOD is identified the tool will be used for an additional 36 hours.
If there are no additional BSOD the troubleshooting using this tool will be completed.

12) After every BSOD please run this version of the log collector and post a new zip into the thread:
og collector v2-beta08.zip