Windows 10: PC reboots and possibly BSOD nightly

I am trying to nail down what is causing this. This is a domain computer with a custom company image, so traditional troubleshooting and workarounds are more difficult. After combing the event viewer and looking through logs I've been led to the minidump file which is as follows. I am not too familiar with the files so wanted a second opinion on trying to track down exactly what is causing these reboots.******************************************************************************* * * * Bugcheck

:)

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

PC reboots (no BSOD) on CPU stress

Try OCCT with just one stick of ram if crash then try the 2nd stick by it self. Lets eliminate the ram from the scenario.

I would think its more likely to be the Ram cuz of OCCT or maybe the mobo but I doubt the tumble did anything to the CPU.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.