Windows 10: PC reset failure

Hello all, I'm somewhat of a gamer, so when one of my favorites ceased to properly function, naturally I was distraught and went searching for answers. All of the solutions I was able to find online produced inconclusive results. Left with very few options, I made an executive decision to just reset my PC and start over. Yet again, I was met with disappointment. Everything seemed fine up until I was brought to the final stage of the process; resetting at the Alienware load screen, the process would fail and cancel itself out somewhere between 29 and 33 percent. Yet again I went online searching for answers and yet again I found nothing that helped, so I came here. Thanks for going through the trouble of reading this far, what are your thoughts?

:)

 

PC reset failure

Hi Adam, it depends on your BIOS, it is different on all PC's, ultimately, you need to get the installation media to the top of the Boot order list, try the steps listed above, they should get you there . ..

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Windows 10 reset failures. Computer won't boot now and getting frustrated.

Hi Alfred,

To help you with your concern regarding the reset failure, let me suggest you to do a startup repair. Kindly follow the steps below:

• Press Windows key
• Hold Shift key then click Restart
• You'll be prompted to the Advance Startup Options
• Select Troubleshoot
• Advanced options
• Startup repair

Please let us know how it goes for us to assist you further.