Windows 10: Pc stuck at Gigabyte screen..

Hello, First of all thanks in advance for helping me. Sometimes when I turn on my pc it gets stuck at the gigabyte screen and doesn't do anything else. Then when I unplug the power cable and then plug in and turn on the PC it turns on properly. I have tried removing the motherboard's CMOS battery and reinserting it, but that didn't solve the problem. Please tell me how can I solve this in such a situation.

:)

 

Stuck at Gigabyte screen after shutting down brand new PC - newly installed Win 10

PC get's stuck in the motherboard screen only displaying GIGABYTE!

The PC is brand new.

Win 10 OS newly installed.

It always happens after installing the OS and shutting down the PC.

It get's stuck in the GIGABYTE screen after turning it back on.

It doesn't do this when restarting the PC but only when shutting it down and turning it back up.

There's SSD and HDD installed in the PC

OS is installed in the SSD

We tried installing OS in HDD - Same problem

We tried removing the HDD and leave the SSD while going through the installation - Same problem

Only resolution we could think of was to reinstall the OS

We tried NOT turning the PC off for at least a day after installing OS - That seem to work

But it's such a hassle in case of power interruption we don't have UPS for the PCs and will have to reinstall the OS again because it get's stuck in the GIGABYTE if shut down in less than 24 hours.

Is there another fix to this?

Would appreciate any response.

Thank you!

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

New PC gets stuck on gigabyte Aorus screen

I have a new pc with specs as follows:-

Aorus Gigabyte X570S Master MOBO

Ryzen 9 5900x CPU

2 x 32Gb Gskill 3600mhz RAM

3 x Samsung 980 Pro 1Tb SSD

1 x Samsung 980 Pro 2Tb SSD

Gigabyte Aorus RTX 3070 Ti Master GPU

Corsair RM850X PSU

2 x Gigabyte M32U Monitors using DP outputs.

When I try to install windows 11 pro which is on USB, my pc starts and when the Gigabyte Aorus Logo comes up on my monitor it gets stuck at this point.

All drives including the usb show in the bios as does both sticks of RAM. BIOS is F2. I have tried 4 different usb inputs but same problem with all of them.

Does anyone know how I can solve this please.