Windows 10: PC Stuck in Reboot Loop with no Display

My PC has been turned off for about the past six months. After trying to turn it on, my PC began rebooting over and over and I also didn’t have any display on my monitor. I disconnected the GPU, RAM, SSD, HDD and peripherals but it was still stuck in the loop. After unplugging some parts the PC will sometimes start without looping but there is still no display. I’ve tried a different outlet and checked to make sure the problem isn’t my monitor. I don’t have on-board graphics so unfortunately I cant use that. If you need any information about my PC just ask.

:)

 

Stuck in Reboot loop after power cut

Hi,

We understand your concern and appreciate the time and effort that you have invested in to fix the issue.

Before we proceed, I would like you to state which troubleshooting steps have you performed bedsides the mentioned to fix the issue.

As per the description, I suspect that you might be stuck in a reboot loop. I suggest that you perform Power Drain and check if it helps

• Unplug the charger and remove the battery of your laptop, if using a desktop remove the power cord.
• Press and hold the Power button for 30sec
• Plug the charger/power cord and restart system

Hope this helps

Regards

 

Computer Stuck in Boot Loop

Hi,

We are glad that you tried some troubleshooting steps to fix the issue, but usually the issue occurs due to corrupted system file. In order for us to assist you, we suggest to check this thread and look for Deepika Gowda answer. It contains troubleshooting
steps pertaining to the issue:
Computer stuck with a reboot loop on Windows 10.

We look forward to your response.

 

Windows 10 stuck in reboot loop

Hi James,

Thank you for posting in Community, we apologize for the inconvenience caused and we will try to assist you in the best way we can.

As per your query, I am led to believe that you re currently stuck in a reboot loop. I would suggest that you perform power drain and check if you are able to restore back to your normal desktop. To do so follow the steps below:

• Unplug the charger and remove the battery of your laptop, if using a desktop remove the power cord.
• Press and hold the Power button for 30sec
• Plug the charger/power cord and restart system.

I would not suggest that you format your hard drive due to the reasons below:

1. If your system was installed with Windows 8.1 at the time of purchase, formatting it will lead to a lost of your product key, as the key is pre injected to the motherboard.

2. You will be unable to activate the OS and you will have to contact your systems manufacturer if you are faced with any driver related issues.

Hope this information helps.