Windows 10: Pc stuck on recovery blue screen

I’m asking how to fixRecovery your pc/device needs to be repaired A required device isn’t connected or can be accessed You’ll need to use recovery tools. If you don’t have any instillation media like a disc or usb device contact your PC administrator or Pc/Device manufacturer.Error code: 0xc000000fGiven optionsPress enter to try again Press F1 to enter recovery environment Press F8 for startup settingsPress Esc for UEFI Firmware settingsI can’t do anything because my keyboard, Corsair k70 and my mouse, Logitech g502 Hero will not work, likely due to Fast startup being on. I do own a EzaLink

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

blue screen issue


after monthes of running system it was fine then on windows 7 it blue screened after looking it over myself and getting advice from local pc shop they suggest upgrading os will fix the issue so I upgraded to win 8.1 and along followed the blue screens now again upgrading after more advice I'm on win 10 and the bluescreens followed as a bad pool error rebooting I have included the requested report please help as spending the $150 the local pc shop wants is my next step

 

Unable to boot the PC, stuck in recovery mode screen​

Hi Joe,



Thank you for writing to Microsoft Community Forums.



I understand that you are unable to boot the PC normally as it is stuck in recovery mode.

1. Were there any recent updates installed on the PC?
   
2. What is the exact make and model of the PC?
   

I would suggest you to follow the steps mentioned below and check if that helps.



Method 1:



Boot the PC into safe mode with networking and check if you are able to login. Refer the article to

Start your PC in safe mode in Windows 10, refer the section
From a black or blank screen.



Method 2:



Perform a system restore to revert the PC back to the state when everything was working fine. Refer the article

Recovery options in Windows 10, refer the section
Use installation media to restore or reset your PC.



Note:
Do not reset the PC; resetting the PC will remove all the data and installed programs from the PC.



We await your response.



Regards,

Prakhar Khare

Microsoft Community – Moderator