Windows 10: PC Switching Off After I turn It On

Hi all,For the past couple of days I have had an issue with my PC that is quite troubling. I press the power button to turn it on, it starts to load and often gets just past the windows logo then it turns itself off. It doesn't shut down it just shuts off without warning. I have to go through this several times before it actually boots properly, and sometimes when I turn it back on it will go to recovery and say "Looks like Windows hasn't loaded correctly" which to me seems like it could be a hard drive issue, because based on what I know its telling me that Windows has only partially loaded e

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Airplane mode switch not working

Since the troubleshooting steps that were provided did not resolve the issue, we suggest switching on the Radio Management Service. To do that, please follow the steps below:

• Press Windows key + R.
• Type services.msc, then hit Enter.
• Search for Radio Management Service.
  
• Right-click, then choose Start.

Note: Never ever set this service to "Disabled".

Get back to us if the steps won't work.

 

Pc wont turn on

I'm sorry to hear that your PC isn't turning on. Here are a few troubleshooting steps you can try:

1. Check the power source: Make sure your PC is plugged into a working power outlet and that the power cable is securely connected to both the PC and the outlet.
   
2. Test the power cable: If possible, try using a different power cable to see if the issue is with the cable itself. Alternatively, you can try using the current power cable with a different device to ensure it's functioning properly.
   
3. Check the power supply: If your PC has a separate power supply unit (PSU), make sure it's switched on (if applicable) and that all connections from the PSU to the motherboard are secure.
   
4. Reset the power supply: Sometimes the power supply can get stuck in a "protective" state, preventing the PC from turning on. To reset it, turn off the PC, unplug the power cable, and hold down the power button for about 15 seconds. Then plug the power cable back in and try turning on the PC.
   
5. Check for hardware issues: If the above steps didn't resolve the issue, it's possible that a hardware component is causing the problem. In this case, you may need to consult a professional technician or contact the manufacturer for further assistance.
   

Remember to prioritize your safety while troubleshooting. If you're unsure or uncomfortable with any of the steps, it's best to seek professional help.