Windows 10: pc turns on but no display

hi my pc turns on but no display and the dram light is on at first it would turn on and no display the cpu light was on and then turn off by itself this continued for about 3 to 4 times before i fixed it but now the dram is the problem but i've already tested the ram with another computer and it work does anyone have any ideas

:)

 

Display does not turn off when pc is idle

Just did all the suggestions. Did not work. Display does not turn off.

This issue was from the beginning when I downloaded Win 10. I had Win 8.1 and the display always turned off as I set it.

My pc is HP Pavilion Touchsmart 23 all-in-one. According to "checking for updated drivers on display and monitors", I always get the response that the drivers currently installed are the correct ones.

 

Pc turns on, but will not display anything

So as the title says my pc will now turn on, but it will not display anything on the monitors. i have tried one and both monitors.

list of what i have tried

putting my video card into my dads computer.
resetting cmos by taking bat out for 10-15min


thats all i have tried but it worked before i had turned it off from it being plugged into my tv.

I don't know what to do again, Arg i am starting to hate pc's i want a mac so bad now.......

thanks for the help in advance.

 

Display does not turn off when pc is idle

Hi Jorog,

We appreciate you for being a part of Windows 10.

• Since when you are facing this issue?
• Is your computer up to date?

Until you reply back to us with the required information, you may follow the below suggestions

Kindly follow the below steps and check if it helps.

I suggest you to create a new power plan and check if there is any issues with the current power plan which you are using at present in your system. Follow the below steps sequentially.

Step 1:

• Press Windows + R keys on the keyboard to open Run command.
• Type powercfg.cpl to open the power settings.
• You may create the new power plan by clicking on the Create a powerplan
  on left navigation pane.
• Assign the name you wish to new power plan, click on Next and change the settings accordingly and click on
  Create.

Step 2:

• Press Windows + R keys on the keyboard to open Run command.
• Type powercfg.cpl to open the power settings.
• Select your current plan and click on Change plan settings. (The power plan which you have created in the step 1
• Set the Turn off the display to 5 minutes/any other time you wish.

I hope the above information helps. Kindly let us know if you need any further assistance with Windows. We are glad to assist you.

Thank you.