Windows 10: PC will not boot Start PXE over IPv6

Hi, I have recently moved desk and PC, and when I have tried to turn on my old PC to copy some stuff to one drive it will not start now.Its come up on start up with:Start PXE over IPv6..PXE-E16: No offer received.Start PXE over IPv4.PXE-E18: Server response timeout.Is there something I can do to get my stuff off the hard drive? Not bothered if its broken after that as I am on a new PC anyway.Please help. ThanksJamie

:)

 

start PXE over IPv6

"PXE over IPv6" means the computer is trying to find a
network device that has an operating system available to boot your computer.

The network interface card (NIC) can be a bootable device the same as a hard disk, optical disk or USB drive. There are two possible reasons why this message has come up.

1 Change in Boot Order. Each Boot device is accessed in sequence normally hard drive 1st then optical, USB etc. with PXE last (although PXE can be turned off altogether). If for any reason the boot order changes such that PXE comes before the drive then
the message will come up. However cancelling the option should then make it progress onto the next device. Eventually the hard disk will boot.

2 Failure of a bootable device. If a drive fails such that no other device can start the computer then the BIOS will step through the available devices until it gets to the NIC option and displays the message. If the option is cancelled the BIOS will display
that no bootable device was found and to restart the computer.

 

Windows 10 incorrect start up PXE over IPv4 and start PXE over IPv6

If your device isn't connected to LAN, is your laptop an office laptop? Is it connected to a domain perhaps?

If your device is under a domain connection, I've noticed on-going discussions about this same issue in the
TechNet Forum since domain issues are out of support scope here in the
Community Forum.

But if your device isn't connected to a domain, HairyFool shared on
this thread that
""PXE over IPv6" means the computer is trying to find a network device that has an operating system available to boot your computer."

It is possible that this has been caused by a change in the boot order. Normally, the hard drive should come first, second is the USB, while PXE at the last. In this error message, PC has changed the boot order making PXE the first one in the boot order.

If that's the case, you'll need to contact your laptop manufacturer to help you get back the normal boot order in the BIOS, since BIOS topics are out of the
Community Forum support scope like domain issues.

Looking forward for your confirmation.

 

Start pxe over ipv4 and start pxe over ipv6

I have a dell 910 ran into a start PXE over ipv4 and stuck on start pxe over ipv6. I left my computer for a day and it still stuck on ipv6. I've tried some advice on youtube but i havent fixed the problem. Please help.